HP LH4r Integrated HP NetRaid Controller Configuration Guide - Page 66
Step J., Install NOS and HP NetRAID Drivers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 6 HP NetRAID Software ◊ For Windows NT, create the utility diskette by selecting NetRAID Assistant for WindowsNT and Windows95 in the diskette library. ◊ For NetWare, select NetRAID Utilities for NetWare in the diskette library. 4. Follow the onscreen instructions to create the NOS-specific diskette. 5. Remove the HP NetServer Navigator CD-ROM and click Exit to reboot the HP NetServer. Print the Network Operating System Instructions Print the Network Operating System Installation Instructions you saved previously onto the drivers disk. In Step J, you will follow these instructions to load the drivers from the driver diskette. Step J. Install NOS and HP NetRAID Drivers Install Network Operating System (if necessary) If the NOS is not already installed on the HP NetServer, install it according to the instructions you printed in Step I after you created the HP NetRAID drivers diskette. If you are using Novell Netware, also see the Novell NetWare Installation book. For the HP NetServer LH 3 or LH 3r, the NOS can be installed on a non-hot-swap drive or on a logical drive in the RAID subsystem. Install HP NetRAID Series Driver Load the appropriate driver as instructed in the Network Operating System Installation Instructions that you just printed in Step I earlier in this chapter. The driver names are listed in the table that follows. Network Operating System Microsoft Windows NT 4.0 NetWare 3.2x NetWare 4.1x HP NetRAID Drivers mraidnt.sys Mega3_1x.dsk Mega4_xx.ham Mega4_xx.ddi 60