HP LH4r Integrated HP NetRaid Controller Configuration Guide - Page 7
Introduction
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 Introduction Integrated HP NetRAID Controller The integrated HP NetRAID controller on the HP NetServer LH 3 and LH 3r provides an integral disk array storage system. The controller uses the PCI (Peripheral Component Interconnect) standard to control data transfers on one or two SCSI channels. The integrated HP NetRAID controller supports the following network operating systems: • Microsoft Windows NT 4.0 • Novell NetWare 3.2, 4.11, 4.11 SMP, and SFTIII 4.11 Features of the Integrated HP NetRAID Controller The integrated HP NetRAID controller lets you link multiple hard disk drives together and write data across them as if they were one large drive. You can configure your linked drives in a RAID (redundant array of independent disks) subsystem. Channels and Devices The integrated HP NetRAID controller supports one or two channels as configured by the user. Each of the two integrated Symbios SCSI controllers on the HP NetServer LH 3/LH 3r can be configured as either a RAID or a SCSI channel. The factory default configuration is: • SCSI A: integrated HP NetRAID Channel 0 • SCSI B: integrated SCSI You have complete freedom to change these defaults and to enable both channels for use with HP NetRAID. 1