HP LH4r Integrated HP NetRaid Controller Configuration Guide - Page 27
Configuration Overview
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3 Configuration Overview To configure your integrated HP NetRAID controller, you need to perform the following steps. Steps A through M are described in Chapters 4 through 7 of this guide. Step A. Plan Your Hardware (Chapter 4 and Worksheet A) Step H. Decide Which HP NetRAID Driver You Need (Chapter 6) Step B. Plan Arrays and Logical Drives (Chapter 4 and Worksheets A and B) Step I. Use HP NetServer Navigator CD-ROM to Prepare Disks (Chapter 6) Step C. Verify Hardware Setup (Chapter 5) Step J. Install NOS and HP NetRAID Drivers (Chapter 6) Step D. Enable Integrated HP NetRAID Controller (Chapter 5) Step K. Install NOS-specific Configuration Utility (Chapter 6) Step E. Boot HP NetServer Navigator to Launch HP NetRAID Assistant (Chapter 5) Step L. Run HP NetRAID Express Tools (Chapter 6) Step F. Configure Arrays and Logical Drives (Chapter 5) Step M. (Optional) Prepare for Online Capacity Expansion (Chapter 7) Step G. Save Configuration and Initialize (Chapter 5) Once you have configured your HP NetRAID system, refer to Chapter 8, "Managing Servers Over the Network," and the HP NetRAID Series User Guide for information on managing your controller from a remote location. If you have configured and are operating a one-channel HP NetRAID system, and later you want to configure a second channel, follow the steps in Chapter 9, "Configuring a Second Integrated HP NetRAID Channel." Chapter 10, "Understanding HP NetRAID Utilities," provides menu maps for the three utilities that are available to manage your HP NetRAID system. 21