HP LH4r Integrated HP NetRaid Controller Configuration Guide - Page 64
Step I., Use the HP NetServer Navigator CD-ROM, to Prepare Disks
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 6 HP NetRAID Software Step I. Use the HP NetServer Navigator CD-ROM to Prepare Disks In this step, you will use the HP NetServer Navigator CD-ROM to create the diskettes you need to install the non-I2O HP NetRAID drivers and the HP NetRAID configuration utility specific to your NOS. You need to: • Verify that you have the most recent version of the HP NetServer Navigator CD-ROM • Create the diskette(s) containing the non-I2O drivers and instructions • Create the diskette(s) containing the NOS-specific configuration utility Check Latest Versions To ensure that you have the latest versions of the software, obtain the current Status Report for your HP NetServer Navigator CD-ROM. This report describes any software updates since the CD-ROM was created, and indicates whether you need any updates and how to obtain them. Each version of the CD-ROM has a four-digit Document Number printed on the disk. Obtain the Status Report for your CD-ROM in one of these ways: • FAX: Call HP's FAX system at 1-800-333-1917 (or 1-208-344-4809 from your FAX machine). Request the FAX using the Document Number. • Internet: Access URL http://www.hp.com/netserver/servsup. Click on the line that corresponds to your document number. • Internet FTP: Address: ftp://ftp.hp.com/pub/servers • BBS: Call 1-208-344-1691; download .txt from the NSNAVCD library. • CompuServe: GO HPPC; download .txt from the HP NetServer library. Create Drivers Diskette and Instructions You must use the HP NetServer Navigator CD-ROM to create the diskette containing the drivers for your NOS and the instructions for installing them. 58