HP LaserJet Pro MFP 3101-3108fdne User Guide - Page 99
To restore the printer network settings from the printer control panel, Cartridge low
View all HP LaserJet Pro MFP 3101-3108fdne manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
To restore the printer network settings from the printer control panel 1. On the Home screen of the printer display, touch or swipe down the tab open the Dashboard, and then touch Setup . at the top of the screen to 2. Touch Network Setup. 3. Touch Restore Network Settings, and then follow the onscreen instructions. NOTE: ● You can print the network configuration page and verify that the network settings have been reset. ● When you reset the printer network settings, previously configured network settings (such as the link speed or IP address) are removed. The IP address is set back to the Automatic mode. ● You can visit hp.com/plus-support for information and utilities that can help you correct many common printer problems. ● (Windows) Run the HP Print and Scan Doctor to diagnose and automatically fix printing issues. The application is only available in some languages. Cartridge low This topic describes how to manage the cartridges at low and very low settings. Cartridge is low Actual cartridge life remaining may vary. Consider having a replacement available to install when print quality is no longer acceptable. The cartridge does not need to be replaced now. Continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality. To redistribute the toner, remove the toner cartridge from the printer and gently rock the cartridge back and forth about its horizontal axis. For graphical representation, see cartridge replacement instructions. Reinsert the toner cartridge into the printer and close the cover. Cartridge is very low Actual cartridge life remaining may vary. Consider having a replacement available to install when print quality is no longer acceptable. The cartridge does not need to be replaced now unless the print quality is no longer acceptable. Once an HP toner cartridge has reached Very Low, HP's Premium Protection Warranty on that toner cartridge has ended. Change the "Very Low" settings To change printer supplies settings using EWS You can change the way the printer reacts when supplies reach the Very Low state. You do not have to re-establish these settings when you install a new toner cartridge. 1. Open the EWS. See Configure the printer using the Embedded Web Server (EWS). To restore the printer network settings from the printer control panel 87