HP LaserJet Pro MFP M329 User Guide - Page 50
Enable or disable the Cartridge Protection feature
View all HP LaserJet Pro MFP M329 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Enable or disable the Cartridge Protection feature The Cartridge Protection feature can be enabled or disabled using the control panel or the Embedded Web Server (EWS). ● Use the printer control panel to enable the Cartridge Protection feature ● Use the printer control panel to disable the Cartridge Protection feature ● Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature ● Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature NOTE: Enabling or disabling this feature might require entering an administrator password. Check with your administrator to determine if an administrator password has been set. EWS passwords cannot be recovered. Use the printer control panel to enable the Cartridge Protection feature From the printer control panel, a network administrator can enable the Cartridge Protection feature. This protects the cartridges associated with the printer from being stolen and used in other printers. 1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon . 2. Open the following menus: 1. Supply Settings 2. Cartridge Protection 3. Touch Protect Cartridges to enable the feature. CAUTION: After enabling cartridge protection for the printer, all subsequent toner cartridges installed in the printer are automatically and permanently protected. To avoid protecting a new cartridge, disable the feature before installing the new cartridge. Turning the feature off does not turn off protection for cartridges that are currently installed. Use the printer control panel to disable the Cartridge Protection feature From the printer control panel, a network administrator can disable the Cartridge Protection feature. This removes protection for any new cartridges installed in the printer. 1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon . 2. Open the following menus: 1. Supply Settings 2. Cartridge Protection 3. Touch Off to disable the feature. 38 Chapter 3 Supplies, accessories, and parts ENWW