HP LaserJet Pro P1606 HP LaserJet Professional P1560 and P1600 Series Printer - Page 123
Disconnect two connectors callout 1
View all HP LaserJet Pro P1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
2. Remove four screws (callout 1), the scanner cover (callout 2) and the sheet-metal plate (callout 3). NOTE: The scanner cover and plate are removed as one assembly. TIP: When the cover is reinstalled, make sure that the black screws (callout 4) are installed in the correct screw holes. Figure 2-109 Remove the duplex-reverse solenoid (2 of 5) 4 1 2 3 3. Disconnect two connectors (callout 1), and then release the wire harness (callout 2) from the guides (callout 3). Figure 2-110 Remove the duplex-reverse solenoid (3 of 5) 1 3 2 ENWW Main assemblies 105
2.
Remove four screws (callout 1), the scanner cover (callout 2) and the sheet-metal plate (callout 3).
NOTE:
The scanner cover and plate are removed as one assembly.
TIP:
When the cover is reinstalled, make sure that the black screws (callout 4) are installed in
the correct screw holes.
Figure 2-109
Remove the duplex-reverse solenoid (2 of 5)
1
2
3
4
3.
Disconnect two connectors (callout 1), and then release the wire harness (callout 2) from the guides
(callout 3).
Figure 2-110
Remove the duplex-reverse solenoid (3 of 5)
1
3
2
ENWW
Main assemblies
105