HP OmniBook 2000 HP OmniBook 2000 - Installation and Setup Guides - Page 63
To connect a parallel device, To view or change parallel port assignments
View all HP OmniBook 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Expanding the OmniBook Connecting Devices To connect a parallel device The OmniBook 25-pin parallel port is a standard parallel port. The most common types of parallel connections involve connections to printers and to other computers. • For a printer connection, use a standard parallel printer cable available at computer dealers or electronic supply stores. • For any other connection, such as a bi-directional connection, use a special parallel cable designed for that purpose. See the manual for the software you're using. To view or change parallel port assignments You can see and change the parallel port names (LPT1, LPT2, LPT3) assigned to the printer port. 1. Save any open files-you may need to reboot your OmniBook. 2. Press Fn+F2 to enter the System Configuration utility. 3. From the Input/Output menu, click LPT Port. 4. Select the new port assignment and click OK. 5. From the Exit menu, click Save and Reboot. If you're prompted, enter your password, then click OK. 6. Click OK to reboot your OmniBook. The parallel addresses are as follows: • LPT1: address 378 hex. • LPT2: address 278 hex. • LPT3: address 3BC hex. 3-13