HP P6300 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 12
Total number of iSCSI and iSCSI/FCoE initiators, When configuring the iSCSI initiators
View all HP P6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Total number of iSCSI and iSCSI/FCoE initiators For one P63x0/P65x0 EVA controller, and assuming a redundant configuration, HP P6000 Command View supports 256 initiators and 255 LUNs, plus LUN 0. On the iSCSI/FCoE modules, HP P6000 Command View supports 1024 initiators, 1024 LUNs, and 256 LUNs per virtual port group (VPG). HP P6000 Command View supports configuring the iSCSI and iSCSI/FCoE modules for redundant operation. Although each module can be configured separately, an expert level of knowledge is required to manage the two LUN presentation levels and to use the CLI of the iSCSI and iSCSI/FCoE modules. HP does not recommend separate module configurations. When configuring the iSCSI initiators, create path logins to the .1 and .2 iSCSI target IQNs to ensure redundant iSCSI controller path connectivity. For a simplified network configuration, Figure 4 (page 12) illustrates four target paths being displayed for login for the iSCSI module pair. Figure 5 (page 13) shows sixteen target paths (four x four VPGs) being displayed for login for the iSCSI/FCoE module pair. Figure 4 iSCSI initiator view of the P63x0/P65x0 1 GbE iSCSI module's target paths 12 Reviewing and confirming your plans