HP P6300 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 51
Upgrading the iSCSI or iSCSI/FCoE module firmware, The Code Load iSCSI Controller window opens - command view update
View all HP P6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Figure 40 Set iSCSI Controller Time Upgrading the iSCSI or iSCSI/FCoE module firmware NOTE: HP recommends that you always use the current versions of iSCSI and iSCSI/FCoE module firmware, which is available on HP Software Depot: http://www.hp.com/support/software Updating the iSCSI or iSCSI/FCoE module firmware is separate from upgrading the XCS controller software, but the process is the same (using the Code Load function in HP P6000 Command View). NOTE: HP recommends that you update one module at a time to avoid a service interruption. To update the module firmware: 1. Select the iSCSI controller in the Navigation pane. 2. Select Code Load. The Code Load iSCSI Controller window opens (Figure 41 (page 51)). Figure 41 Code Load iSCSI Controller 3. Select Browse, and navigate to the new image file. 4. Select Next Step. 5. Select Finish. Upgrading the iSCSI or iSCSI/FCoE module firmware 51