HP P6300 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 15

Discovery, Advanced, CHAP Login Information, Targets, Log On, under Target Portals.

Get HP P6300 PDF manuals and user guides View all HP P6300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

1. Click the Discovery tab and when manually discovering iSCSI target portals: a. Click Add under Target Portals. b. Enter the IP address of the iSCSI port of the 1 GbE iSCSI Modules or the 10GbE iSCSI/FCoE modules. c. Click Advanced. d. Select the CHAP Login Information check box. e. Enter the CHAP secret, for example, CHAPsecret01, for the 1 GbE iSCSI modules or the 10GbE iSCSI/FCoE modules discovered iSCSI initiator in the Target Secret box, for example, CHAPsecret01. f. Click OK and the initiator completes target discovery. 2. Click Targets and select the appropriate target for login. 3. Click Log On and then click Advanced. 4. Select the CHAP Login Information check box. 5. Enter the CHAP secret, for example, CHAPsecret01, for the discovered iSCSI initiator of the iSCSI or iSCSI/FCoE modules in the Target Secret box. 6. Click OK twice. To enable bi-directional CHAP for the iSCSI initiator entries of the iSCSI or iSCSI/FCoE modules: 1. Run the set chap CLI command to determine if the iSCSI initiator IQN is listed. MEZ75 (admin) #> set chap A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Index iSCSI Name 0 iqn.2004-09.com.hp:fcgw.mez75.1 1 iqn.2004-09.com.hp:fcgw.mez75.1 2 iqn.2004-09.com.hp:fcgw.mez75.1.01.5001438004c68968 3 iqn.2004-09.com.hp:fcgw.mez75.1.01.5001438004c6896c 4 iqn.2004-09.com.hp:fcgw.mez75.1.02.5001438004c68968 5 iqn.2004-09.com.hp:fcgw.mez75.1.03.5001438004c68968 6 iqn.2004-09.com.hp:fcgw.mez75.1.04.5001438004c68968 7 iqn.2004-09.com.hp:fcgw.mez75.1.02.5001438004c6896c 8 iqn.2004-09.com.hp:fcgw.mez75.1.03.5001438004c6896c 9 iqn.2004-09.com.hp:fcgw.mez75.1.04.5001438004c6896c 10 iqn.1991-05.com.microsoft.perf2.sanbox.com Please select a iSCSI node from the list above ('q' to quit): 10 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. CHAP (0=Enable, 1=Disable) [Disabled] 0 CHAP Secret (Max = 100 characters All attribute values that have been changed will now be saved. Plan your storage configuration 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
1.
Click the
Discovery
tab and when manually discovering iSCSI target portals:
a.
Click
Add
under Target Portals.
b.
Enter the IP address of the iSCSI port of the 1 GbE iSCSI Modules or the 10GbE
iSCSI/FCoE modules.
c.
Click
Advanced
.
d.
Select the
CHAP Login Information
check box.
e.
Enter the CHAP secret, for example, CHAPsecret01, for the 1 GbE iSCSI modules or the
10GbE iSCSI/FCoE modules discovered iSCSI initiator in the Target Secret box, for
example, CHAPsecret01.
f.
Click
OK
and the initiator completes target discovery.
2.
Click
Targets
and select the appropriate target for login.
3.
Click
Log On
and then click
Advanced
.
4.
Select the
CHAP Login Information
check box.
5.
Enter the CHAP secret, for example, CHAPsecret01, for the discovered iSCSI initiator of the
iSCSI or iSCSI/FCoE modules in the Target Secret box.
6.
Click
OK
twice.
To enable bi-directional CHAP for the iSCSI initiator entries of the iSCSI or iSCSI/FCoE modules:
1.
Run the
set chap
CLI command to determine if the iSCSI initiator IQN is listed.
MEZ75 (admin) #> set chap
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index iSCSI Name
----- ----------
0 iqn.2004-09.com.hp:fcgw.mez75.1
1 iqn.2004-09.com.hp:fcgw.mez75.1
2 iqn.2004-09.com.hp:fcgw.mez75.1.01.5001438004c68968
3 iqn.2004-09.com.hp:fcgw.mez75.1.01.5001438004c6896c
4 iqn.2004-09.com.hp:fcgw.mez75.1.02.5001438004c68968
5 iqn.2004-09.com.hp:fcgw.mez75.1.03.5001438004c68968
6 iqn.2004-09.com.hp:fcgw.mez75.1.04.5001438004c68968
7 iqn.2004-09.com.hp:fcgw.mez75.1.02.5001438004c6896c
8 iqn.2004-09.com.hp:fcgw.mez75.1.03.5001438004c6896c
9 iqn.2004-09.com.hp:fcgw.mez75.1.04.5001438004c6896c
10 iqn.1991-05.com.microsoft.perf2.sanbox.com
Please select a iSCSI node from the list above ('q' to quit): 10
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
CHAP (0=Enable, 1=Disable) [Disabled] 0
CHAP Secret (Max = 100 characters) [ ] ************
All attribute values that have been changed will now be saved.
Plan your storage configuration
15