HP P6300 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 19

Preparing your site, Overview, Provide adequate structural support for the floor - eva quickspecs

Get HP P6300 PDF manuals and user guides View all HP P6300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

2 Preparing your site Overview Preparing your site means providing: • Physical rack space for the equipment • AC power for the array • Proper ventilation and temperature conditions • LAN or Fibre Channel cables to attach the array hardware to your network To ensure continuous, safe, and reliable operation of your equipment, place your system in an approved environment. Consider using the HP Enterprise Configurator (eCO) to help plan and configure racks and rack-mountable devices. The eCO is available on the HP website: http://h30099.www3.hp.com/configurator Click Configure under Disk products. Provide adequate structural support for the floor Calculate the total weight of your equipment and verify that your site can support the weight. Provide adequate clearance space and ventilation Be sure to provide adequate clearance around the front and back of the racks. Provide at least 25 inches (63.5 cm) in the front of the rack to allow the doors to open fully and provide at least 30 inches (76.2 cm) in the rear of the rack to allow for servicing and airflow. If there are unused spaces in your rack, attach blanking panels across those empty spaces to force the airflow through the components instead of through the open spaces. Provide adequate and redundant sources of power Make sure that you have two high-line power feeds installed near your computer. These two power sources usually come from the same external power grid, but occasionally may originate from different grids or even entirely different sources. For protection against a power-source failure, obtain and include two uninterruptible power supplies in your installation. For power consumption specifications, see the QuickSpecs document at: http://www.hp.com/go/P6000 Remove product from packaging 1. Remove product from boxes. 2. Verify that contents match your expectations and site requirements. • P63x0 EVA controller enclosure should contain: ◦ One 2U controller enclosure with two HSV340 controller modules, two power supply modules, two fan modules, and two battery modules installed. ◦ Rack mounting hardware ◦ Two 2.0 meter SAS cables ◦ Two power cords Overview 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
2 Preparing your site
Overview
Preparing your site means providing:
•
Physical rack space for the equipment
•
AC power for the array
•
Proper ventilation and temperature conditions
•
LAN or Fibre Channel cables to attach the array hardware to your network
To ensure continuous, safe, and reliable operation of your equipment, place your system in an
approved environment.
Consider using the HP Enterprise Configurator (eCO) to help plan and configure racks and
rack-mountable devices. The eCO is available on the HP website:
h
t
tp://h3
00
9
9
.w
w
w3
.hp
.co
m/co
nf
i
gur
at
o
r
Click
Configure
under Disk products.
Provide adequate structural support for the floor
Calculate the total weight of your equipment and verify that your site can support the weight.
Provide adequate clearance space and ventilation
Be sure to provide adequate clearance around the front and back of the racks. Provide at least
25 inches (63.5 cm) in the front of the rack to allow the doors to open fully and provide at least
30 inches (76.2 cm) in the rear of the rack to allow for servicing and airflow.
If there are unused spaces in your rack, attach blanking panels across those empty spaces to force
the airflow through the components instead of through the open spaces.
Provide adequate and redundant sources of power
Make sure that you have two high-line power feeds installed near your computer. These two power
sources usually come from the same external power grid, but occasionally may originate from
different grids or even entirely different sources.
For protection against a power-source failure, obtain and include two uninterruptible power supplies
in your installation.
For power consumption specifications, see the QuickSpecs document at:
h
t
tp://w
w
w
.hp
.co
m/go/P6
000
Remove product from packaging
1.
Remove product from boxes.
2.
Verify that contents match your expectations and site requirements.
•
P63x0 EVA controller enclosure should contain:
One 2U controller enclosure with two HSV340 controller modules, two power supply
modules, two fan modules, and two battery modules installed.
◦
◦
Rack mounting hardware
◦
Two 2.0 meter SAS cables
◦
Two power cords
Overview
19