HP P6300 HP P6300/P6500 EVA Installation Guide (5697-2485, September 2013) - Page 37
simplifies controller replacement when restoring a configuration. If the telnet management port
View all HP P6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
simplifies controller replacement when restoring a configuration. If the telnet management port cannot obtain a DHCP address, controller 1's module will default to a static address of 192.168.0.76 port 2372, mask 255.255.255.0, and controller 2's module will default to 192.168.0.82 port 2372, mask 255.255.255.0. Alternately, use the RS232 serial port (5, Figure 21 (page 37) and Figure 22 (page 38)) to configure static IP addresses for the telnet management ports. Figure 21 P6000 iSCSI module management ports and P6000 fabrics 1. Fibre Channel fabric A 2. Fibre Channel fabric B 3. iSCSI fabric A 4. iSCSI fabric B 5. RS232 management ports 6. Telnet management ports Configuring the iSCSI and iSCSI/FCoE module management ports 37
simplifies controller replacement when restoring a configuration. If the telnet management port
cannot obtain a DHCP address, controller 1’s module will default to a static address of
192.168.0.76 port 2372, mask 255.255.255.0, and controller 2’s module will default to
192.168.0.82 port 2372, mask 255.255.255.0. Alternately, use the RS232 serial port (5,
Figure 21 (page 37)
and
Figure 22 (page 38)
) to configure static IP addresses for the telnet
management ports.
Figure 21 P6000 iSCSI module management ports and P6000 fabrics
4. iSCSI fabric B
1. Fibre Channel fabric A
5. RS232 management ports
2. Fibre Channel fabric B
6. Telnet management ports
3. iSCSI fabric A
Configuring the iSCSI and iSCSI/FCoE module management ports
37