HP Pro 6305 Maintenance and Service Guide HP Compaq Pro 6305 Microtower Busine - Page 100

System Board

Page 100 highlights

System Board Description System board for use in Windows 7 models (includes thermal material) System board for use in NetClone models (includes replacement thermal material) Spare part number 703596-001 710096-001 1. Prepare the computer for disassembly (Preparation for Disassembly on page 49). 2. Remove the access panel (Computer Access Panel on page 50). 3. Remove the front fan assembly (Front Fan Assembly on page 78). 4. When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules (Memory on page 55) ● Expansion cards (Expansion Cards on page 58) ● Heat sink (Heat sink on page 82). ● Processor (Processor on page 84) 5. Disconnect all cables connected to the system board, noting their location for reinstallation. 6. Remove the eight Torx T15 screws that secure the system board to the chassis. Figure 6-46 System board screws 90 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217

System Board
Description
Spare part number
System board for use in Windows 7 models (includes thermal material)
703596-001
System board for use in NetClone models (includes replacement thermal material)
710096-001
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
49
).
2.
Remove the access panel (
Computer Access Panel
on page
50
).
3.
Remove the front fan assembly (
Front Fan Assembly
on page
78
).
4.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules (
Memory
on page
55
)
Expansion cards (
Expansion Cards
on page
58
)
Heat sink (
Heat sink
on page
82
).
Processor (
Processor
on page
84
)
5.
Disconnect all cables connected to the system board, noting their location for reinstallation.
6.
Remove the eight Torx T15 screws that secure the system board to the chassis.
Figure 6-46
System board screws
90
Chapter 6
Removal and Replacement Procedures Microtower (MT) Chassis