HP Pro 6305 Maintenance and Service Guide HP Compaq Pro 6305 Microtower Busine - Page 91
Power Switch/LED Assembly, Preparation for Disassembly, on Computer Access Panel, Front Bezel
View all HP Pro 6305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Power Switch/LED Assembly Description Power switch/LED assembly Spare part number 646828-001 1. Prepare the computer for disassembly (Preparation for Disassembly on page 49). 2. Remove the access panel (Computer Access Panel on page 50). 3. Remove the front bezel (Front Bezel on page 51). 4. Remove the front fan (Front Fan Assembly on page 78). 5. Disconnect the cable from the system board connector labeled PB/LED. 6. With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it from the chassis. Figure 6-40 Removing the power switch/LED 7. Pull the assembly away from the chassis while threading the cable through the hole in front of the chassis. Power Switch/LED Assembly 81