HP ProBook 6550b HP ProBook 6455b, 6555b, 6450b,and 6550b Notebook PCs - Maint - Page 129
to the right., that secure the display bezel to the display
View all HP ProBook 6550b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
11. Remove the two slotted Torx T8M2.5×11.0 screws (1) that secure the display assembly to the base enclosure. 12. Lift the display assembly (2) straight up and remove it. 13. If it is necessary to replace the display bezel or any of the display assembly internal components: a. Remove the eight rubber screw covers (1). The rubber screw covers are included in the Rubber Kit, spare part number 613459-001. b. Remove the eight Phillips PM2.5×6.0 screws (2) that secure the display bezel to the display assembly. c. Slide and hold the display release latch (1) to the right. d. Flex the inside edges of the top edge (2), the left and right sides (3), and the bottom edge (4) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 121