HP ProBook 6550b HP ProBook 6455b, 6555b, 6450b,and 6550b Notebook PCs - Maint - Page 158
Serial connector and cable, Display assembly see
View all HP ProBook 6550b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Serial connector and cable Description Serial connector and cable for use only on computers equipped with a 15.6-in display assembly Spare part number 613313-001 Before removing the serial connector and cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 79). 5. Remove the following components: a. Bluetooth module (see Bluetooth module on page 81) b. Mass storage device (see Mass storage device on page 83) c. Optical drive (see Optical drive on page 94) d. Keyboard (see Keyboard on page 96) e. Switch cover (see Switch cover on page 103) f. Fan (see Fan on page 111) g. Heat sink (see Heat sink on page 113) h. Palm rest (see Palm rest on page 107) i. TouchPad (see TouchPad on page 109) j. Display assembly (see Display assembly on page 118) k. Top cover (see Top cover on page 130) l. ExpressCard assembly (see ExpressCard assembly on page 135) m. Speaker assembly (see Speaker assembly on page 139) Remove the serial connector and cable: 1. Disconnect the serial connector cable (1) from the system board. 2. Remove the two Hex HM5.0×10.0 screw locks (2) that secure the serial connector to the base enclosure. 150 Chapter 4 Removal and replacement procedures