HP ProLiant 2500 Compaq ProLiant 2500 Servers Installation Guide - Page 44
Installing More Pentium Pro Memory
![]() |
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3-16 Overview of Installing ProLiant 2500 Server and Hardware Options Installing More Pentium Pro Memory You can expand computer memory by installing industry standard Dual Inline Memory Modules (DIMMs) on the processor board of the Pentium Pro system. The following guidelines must be followed when installing additional memory: Use only 32-MB, 64-MB, 128-MB, or 256-MB; EDO- or FASTPAGEbuffered; 4-K refreshed DIMMs. DIMMs must be 60 ns or faster. CAUTION: Use only Compaq DIMMs. DIMMs from other sources may adversely affect data integrity. Power-On Self-Test (POST) will warn of non-supported DIMMs. To install more memory, refer to one of the following installation sources: For a text and illustration procedure, refer to the installation documentation that came with the option kit. For a text only overview of the procedure, refer to the procedure below. For an illustration overview of the procedure, refer to the Hardware Installation and Configuration poster included in the shipping box or to the Processor Board Hood Label located on the inside of the Side Access Panel. To install a Compaq DIMM, complete the following steps: 1. If the computer is on, turn it off and disconnect the power cord. 2. Disconnect any other external equipment connected to the computer. 3. Remove the processor board tray. 4. Place the processor board tray, component side up, on a flat surface. 5. Align the key slot on the bottom edge of each DIMM with the tab in the DIMM socket.
![](/manual_guide/products/hewlettpackard-proliant-2500-compaq-proliant-2500-servers-installation-guide-6355284/44.png)