HP ProLiant 2500 Compaq ProLiant 2500 Servers Installation Guide - Page 53
Installing a Processor CPU, Access Panel.
![]() |
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3-25 Installing a Processor (CPU) To install a processor in the processor board, refer to one of the following installation sources: For a text and illustration procedure, refer to the installation documentation that came with the option kit. For a text only overview of the procedure, refer to the procedure below. For an illustration overview of the procedure, refer to the Hardware Installation and Configuration poster included in the shipping box or to the Processor Board Hood Label located on the inside of the Side Access Panel. The processor installation procedure below is text only. To install a processor: 1. If the computer is on, turn it off and disconnect the power cord. 2. Disconnect any other external equipment connected to the computer. 3. Remove the processor board tray. 4. Place the processor board tray, component side up, on a flat surface. 5. Install the new processor using the instructions provided with the processor option kit or with the Processor Board Hood Label attached to the inside of the Side Access Panel. 6. Reinstall the processor board tray. 7. Reconnect any external peripherals and the power cord. 8. Turn on the computer. Compaq ProLiant 2500 Servers Installation Guide
![](/manual_guide/products/hewlettpackard-proliant-2500-compaq-proliant-2500-servers-installation-guide-6355284/53.png)