HP ProLiant 2500 Compaq ProLiant 2500 Servers Installation Guide - Page 46
Installing Additional Mass Storage Devices
![]() |
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3-18 Overview of Installing ProLiant 2500 Server and Hardware Options Installing Additional Mass Storage Devices Hot-pluggable server models have a total of seven drive bays for installing additional internal mass storage devices. SCSI devices such as diskette, tape, or hard drives can be installed in the vacant non-hot-pluggable, removable media drive bays (SCSI IDs 5 and 6). One-inch or 1.6-inch SCSI hard drives can be installed in the hot-pluggable drive cage (SCSI IDs 0 - 4). The drive cage is capable of configuring a maximum of: Five 1-inch hard drives or Two 1.6-inch hard drives and one 1-inch hard drive The figure below shows five 1-inch hard drives installed in the hot-pluggable drive cage. 6 5 43210 CZR-026.EPS Figure 3-13. SCSI IDs Locations for Hot-Pluggable Models (SCSI IDs 5 and 6 are non-hot-pluggable.) SCSI hard drives on the Integrated Wide-Ultra SCSI Controller on the PCI Bus must be either internal or in an external storage system, but not both.
![](/manual_guide/products/hewlettpackard-proliant-2500-compaq-proliant-2500-servers-installation-guide-6355284/46.png)