HP ProLiant DL360e HP Intelligent Provisioning User Guide - Page 27

IMPORTANT: An embedded NIC card in the server takes the position of eth0 and eth1. A standalone card installed in the server pushes the Lights-Out Management to eth2 and eth3. 2. Click Save. You can also view and change these settings on the Network - IP & NIC Settings screen in the iLO GUI. For more information, see the HP iLO 4 User Guide on the HP website: http://www.hp.com/go/ilo/docs Modifying advanced network settings Use this screen to modify advanced iLO network settings. 1. Configure the following options: • Use DHCP Supplied Gateway - Specifies whether iLO uses the DHCP server-supplied gateway. If not, enter a gateway address in the Static Route Gateway fields. • Use DHCP Supplied DNS Servers - Specifies whether iLO uses the DHCP server-supplied DNS server list. If not, enter the DNS server address in the Primary, Secondary, and Tertiary DNS Server fields. • Use DHCP Supplied WINS Servers - Specifies whether iLO uses the DHCP server-supplied WINS server list. If not, enter the WINS server address in the Primary and Secondary WINS Server fields. • Use DHCP Supplied Static Routes - Specifies whether iLO uses the DHCP server-supplied static route. If not, enter the static route address in Static Route IP Address fields. • Use DHCP Supplied Domain Name - Specifies whether iLO uses the DHCP server-supplied domain name. If DHCP is not used, enter a domain name in the Domain Name box. • Domain Name • Primary DNS Server • Secondary DNS Server • Tertiary DNS Server • Primary WINS Server • Secondary WINS Server • Static Route 1 IP Address • Static Route 1 Gateway 2. Click Save. You can also view and change these settings on the Network - IP & NIC Settings screen in the iLO GUI. For more information, see the HP iLO 4 User Guide on the HP website: http://www.hp.com/go/ilo/docs Configuring SNMP Use this screen to enable and configure SNMP. Performing maintenance tasks 27