HP T5730 TeemTalk 6.0 for Windows User Manual - Page 171

Setup Menus CR = CR/NULL Factory default: Unchecked This option must only be checked if you are going to use the QEDIT application. It overcomes a bug within QEDIT that ignores the LF character if the terminal transmits CR/LF. Inserting a NULL after the CR character cures the problem. Display Form Feeds Factory default: Checked When checked, this will cause form feeds to be represented on the display as FF characters. Ignore Form Feeds Factory default: Unchecked When TeemTalk receives a form feed command from the host, it normally results in a line feed on the display in HP 700/92 mode. Selecting this option will cause TeemTalk to ignore all form feed commands received from the host. Terminal ID Factory default: 70092 This specifies what is reported back to the host in response to a terminal identification request. (Note that not all features of the specified terminal may be supported.) Clicking the arrow button will display a drop-down list box showing the available settings, 70092, 2392A, 2622A, 70094 or 70096. If you are using the keyboard, press the up or down arrow keys until the setting required is displayed. You can either select from this list or enter a different terminal identity in the text box. Pages Factory default: 4 In HP 700-92/96 mode the display area is 80 or 132 columns by 24 lines with 168 lines stored off-screen, giving a total display memory HP 700-92/96 Settings 149