HP T5730 TeemTalk 6.0 for Windows User Manual - Page 173

Setup Menus FldSeparator Factory default: ^_ (i.e. US) This text box is used to specify the ASCII character used to indicate the end of each protected field (except the last) that is sent in Edit mode. To change the current definition, delete the definition displayed in the text box and type in the new one, either as the control key character equivalent or the decimal value of the ASCII character. For example, the default ASCII character US can be entered by typing the characters ^ and _, representing the keys Ctrl + _ which, when pressed together would generate the US code. Decimal values are entered as three-digit numbers immediately preceded by an underscore character. Values with only two digits must be preceded by a zero. For example, the decimal value of US is 31, so this would be entered as _031. BlkTerminator Factory default: ^^ (i.e. RS) This text box is used to specify the ASCII character sent to the host to indicate the end of a data block transmission. To change the current definition, delete the definition displayed in the text box and type in the new one, either as the control key character equivalent or the decimal value of the ASCII character. For example, the default ASCII character RS can be entered by typing the character ^ twice, representing the keys Ctrl + ^ which, when pressed together would generate the RS code. Decimal values are entered as three-digit numbers immediately preceded by an underscore character. Values with only two digits must be preceded by a zero. For example, the decimal value of RS is 30, so this would be entered as _030. HP 700-92/96 Settings 151