HP T5730 TeemTalk 6.0 for Windows User Manual - Page 340

IBM 5250 Emulation 3812-1 Single byte printer 5553-B01 Double byte printer If double-byte character sets (e.g. Japanese) are supported and you wish to use them, then select either 5555_B01 (monochrome) or 5555_C01 (colour) for display, or 5553-B01 for printing. 5 Select the required Monochrome display setting. Note that all IBM 5250 models support both monochrome and colour display. When monochrome is selected, characters will be displayed in green and intense fields will be displayed in white. When monochrome is not selected, the settings specified in the Attributes dialog will be used for the display. 6 Click OK to accept the settings and close the dialog. 7 Display the File menu and select New Connection... to display the New Connection dialog. 8 Specify the settings required to connect to the host. Refer to the chapter "Host Connection Settings" on page 55 for details. 9 Click the Connect button to make TeemTalk attempt to connect to the host with the supplied settings. 10 If necessary, enter the appropriate information to establish an IBM host session in the Network Virtual Terminal mode screen. When an IBM host session has been established, the screen will switch out of Network Virtual Terminal mode and display the IBM 5250 emulation screen. Note: You will be returned to the Network Virtual Terminal screen when the connection to the IBM host has been closed. The IBM 5250 emulation is configured using the IBM 5250 Settings dialog. This is displayed by selecting IBM 5250... in the Settings menu. Refer to the section "IBM 5250 Settings" on page 184 for details. You can save the session settings by selecting Save Session or Save Session As in the File menu. 318 Creating an IBM 5250 Emulation Session