HP T5730 TeemTalk 6.0 for Windows User Manual - Page 95

Host Connection Settings 7 bits add up to an odd number. Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. Flow Control Factory default: Input This option specifies the type of flow control used by the line port to communicate readiness to transmit or receive data from the host. None Input Output In/Out Hardware No flow control. XON/XOFF on received data. XON/XOFF on transmitted data. XON/XOFF on transmitted & received data. DTR/CTS hardware flow control. Data Bits Factory default: 8 This option specifies the number of data bits sent for each transmitted character. Stop Bits Factory default: 1 This specifies the number of stop bits sent for each transmitted character. Transmit Rate Factory default: Unlimited The setting of this option determines the maximum effective baud rate that the emulatortransmits terminal reports and data sent as a result of pasting data to the host. Serial Connection Settings 73