HP T5730 TeemTalk 6.0 for Windows User Manual - Page 84

Host Connection Settings bilities have been tried, at which point the emulation will report a device name rejected error. For example, TEST%d4% will give TEST1 on all connections until the host rejects the name as in use, in which case TEST2 will be used. If this is already in use then TEST3 is used, or if already in use then TEST0. These values are preserved over power off, so the first connection of any given power on may not be TEST1. Assume that the start point is random. Note: There are separate counters for the IBM 3270 and IBM 5250 emulations. When you achieve a TN3270E connection, the LU device name that you are connected as will be displayed on the status line. If the specified device is rejected by the server or host, then an error message box will be displayed indicating the reason. Associate This is available when the IBM 3270 Model option is set to 3287-1 (a printer). It is used to request that the device name of the printer associated with a particular terminal is assigned to this Telnet session. The name of the terminal is specified here. (This is implemented as described in RFC 1647.) TN3270E Options TN3270E in implemented as described in RFC 1647. These options should not be changed unless required by your System Administrator. The Bind setting determines whether or not the server is allowed to send the SNA Bind image and Unbind notification to the emulator. When Responses is selected, positive and negative response handling is supported. It allows the server to reflect to the emulator any and all definite, exception, and no response requests sent by the host application. 62 TCP/IP Connection Settings