HP T5730 TeemTalk 6.0 for Windows User Manual - Page 66

TeemTalk Connection Wizard Settings (Note that the PassThrough option will be unselectable if the printer driver currently selected does not support this facility.) If you find a through print results in data being split into lines, each treated as a separate print job, specify a time in the Seconds Close Delay box (e.g. 5 seconds). This will enable the next line of data to be sent before the print job is assumed to have finished and therefore prevents the print job from being closed prematurely. When set to 0, TeemTalk will not start printing until it receives a 'print end of job' command from the host. Entering any other number will cause TeemTalk to print after the specified number of seconds have elapsed, regardless of whether the 'print end of job' command has been received from the host. If you require the port to be kept open all the time (to stop the printer resetting) enter -1 (minus one). Direct Print Data to a Specific Port (Print through actions only, e.g. IBM 3270 or IBM 5250 host printing.) To direct print data to a specific port, select Print Direct To Port and select the port in the list box. Selecting Auto Line Feed will cause the printer to print at the beginning of the next line when a carriage return command is received. If you find a through print results in data being split into lines, each treated as a separate print job, specify a time in the seconds Close Delay box (e.g. 5 seconds). This will enable the next line of data to be sent before the print job is assumed to have finished and therefore prevents the print job from being closed prematurely. When set to 0, TeemTalk will not start printing until it receives a 'print end of job' command from the host. Entering any other number will cause TeemTalk to print after the specified number of seconds have elapsed, regardless of whether the 'print end of job' command has been received from the host. If you require the port to be kept open all the time (to stop the printer resetting) enter -1 (minus one). Selecting the FormFeed Terminator option will cause the printer to advance the paper to the top of the form when it has finished printing. 44 Printer Port Settings