HP T5730 TeemTalk 6.0 for Windows User Manual - Page 99

Error Messages Notes About Certificates Host Connection Settings encrypted, along with the certificate itself. Please note this is a security risk as anyone who can acquire a copy of your registry will be able to use your certificate. 5 Click OK once you have configured the certificates. 6 Either click Next in the Connection Wizard, or Connect in the New Connection dialog. 7 Login as usual when the telnet login prompt appears. Could not connect TCP/IP socket. The most likely cause of this error is that the service is not running on the server, or the port number is incorrect. Could not connect SSL socket. Please check that your client certificate is correct. This message is returned if the server refuses the SSL connection. The most likely causes are that the server is expecting a client certificate but none has been specified or the client certificate specified is invalid for some reason. This error may also be seen if the server is running an incompatible version of SSL. TeemTalk currently supports SSL2, SSL3 and TLS. The server's certificate cannot be verified. The server's identity certificate was not signed by any of the root certificates installed in TeemTalk. TeemTalk will not connect to a host it cannot verify. Common name does not match host name. The common name is part of the server's certificate. SSL assumes this will match the host name given in the Host Name box in the Connection Wizard, or Connect To box in the New Connection dialog. If they do not match TeemTalk will not connect to the host. The SSL Protocol uses three types of certificate: 1 Server certificates. These are always sent by the server to the client to validate the server's identity. SSL handles them internally and they are never saved on the client. SSL Connection Settings 77