HP T5730 TeemTalk 6.0 for Windows User Manual - Page 267

Setup Menus You can display the soft buttons in a separate window by deselecting the Attached option. If you close the Soft Buttons window, you can display it again by setting the Visible Levels option to anything other than 0, then clicking OK. The current position and size of the Soft Buttons window can be saved so that it is displayed the same way the next time TeemTalk is loaded. To do this, select the Save Session As option in the File menu, make sure the Soft Buttons option is checked, then click OK. Programming a Soft Button 1 Select the Level number. 2 Select the Button number. 3 Check the Local check box to make the button definition action locally, or uncheck it to transmit the definition to the host when the button is pressed. 4 Enter a Name to be displayed on the button, up to ten characters long. 5 Enter the button definition in the Command box, or make a selection from the list of Predefined Macros then click Apply. 6 Click the Add button to accept the definition. The new definition will be added to the Current Definitions list. 7 To save the definitions, click OK to exit, then select Save Session As in the File menu, make sure the Soft Buttons box is checked, then click OK. Assigning UserDefined Functions You can enter your own button definition in the text box associated with each button. The definition can contain key functions and control characters to be actioned as well as normal text. Refer to the appendix "Programming Keys & Buttons" on page 447 for details Soft Buttons 245