HP XM600 hp kayak xm600 series 1, troubleshooting guide for minitower models - Page 21
Configuration Problems, Symptom, Type of Problem
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Configuration Problems If your PC Workstation boots normally, but you are having problems configuring different parts of your PC Workstation. Symptom Type of Problem PC Workstation starts to boot, but a POST (PowerOn Self-Test) error message is displayed on the screen. • CMOS test error. • Keyboard or mouse are not working correctly. • Floppy disk drive LED does not appear. • Hard disk drive, DVD, CD-RW or CD-ROM drive are not accessible. • Serial or Parallel ports are incorrectly configured. • Devices are not cabled correctly. • Device drivers missing or incorrectly installed. You cannot turn off the PC Workstation. You have forgotten your password. Your PC Workstation has an audio problem. • No sound when running any application. • No sound when playing a CD-ROM. • No output from the digitized sounds. • Audio input from the microphone too low, or none at all. • PC Workstation hangs while recording. Your PC Workstation has a software problem. • Software application will not run. • Date and time are wrong. Your PC Workstation repeatedly loses its configuration settings. You have problems using the Euro Symbol Refer to page 23. Refer to page 24. Refer to page 25. Refer to page 26. Refer to page 27. Refer to page 28. Refer to page 28. Refer to page 29. Refer to page 30. Refer to page 31. Refer to page 32.