HP XM600 hp kayak xm600 series 1, troubleshooting guide for minitower models - Page 37
Using the HP Setup Program, First, Turn On or Restart, Your PC Workstation, To Go to the Setup
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Configuration Problems Using the HP Setup Program Using the HP Setup Program The Setup program allows you to view and change the configuration of your PC Workstation, such as the passwords and boot device order. Follow these instructions to check the configuration. First, Turn On or Restart If your PC Workstation is off, turn on the display and then the PC Your PC Workstation Workstation. If the PC Workstation is already turned on, save your data, exit all programs and restart your PC Workstation. For Windows NT 4.0, Windows 95 or Windows 98, use the Shut Down ÕRestart your computer command in the Start menu. This command will automatically exit the operating system and restart the PC Workstation. To Go to the Setup Program To go into the Setup program, press F2 while the "Kayak" logo appears on your display. . 37