Hitachi DZHS500A Owners Guide - Page 141
With DVD-RW VF-mode/DVD-R/+RW, the setting of 16:9 mode
UPC - 050585223943
View all Hitachi DZHS500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
English Message Cause & Troubleshooting DVD error has occurred. Disc error could have occurred during editing of scenes. Keep DVD inside & Turn off the DVD video camera/recorder with the disc being used restart. in it, connect AC adapter/charger, and then power the DVD video camera/recorder again. Repair of scenes will be tried. DVD error has occurred. This message will appear if disc error has occurred during Please keep DVD inside dubbing. Connect the AC adapter/charger to DVD video camera/ and set power switch to recorder, and set the power switch to "DVD": Video file will be "DVD". repaired. DVD error has occurred. This message will appear when disc error occurred during Unfinalizing is not unfinalization, and unfinalizing disc failed. Replace the disc. complete. DVD error has occurred. • Use another disc. • See *3 and *4 on page 144. • Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/ recorder. Initialize the disc or use another disc. • Initializing the disc will erase all data on it. DVD full. Cannot execute. This message will appear if the capacity of the scene selected is larger than the free space on disc. Select another scene, or use another DVD. DVD must be finalized before it can be played back on DVD player or DVD recorder. • This message will appear if you remove a DVD-RW (VF-mode)/ DVD-R that has not been finalized from the DVD video camera/ recorder. • See *5 on page 144. Drive overheat. Please retry later. The temperature inside the DVD video camera/recorder is too high, and writing to disc or reading from disc may not be performed normally. Turn the DVD video camera/recorder off and wait for a while. The temperature will be effectively decreased if the DVD video camera/recorder is placed in a well-ventilated spot. DVD-R* cannot dub the scene recorded in STD mode and 16:9. With a DVD-RW (VF-mode)/DVD-R/+RW, no video can be recorded with a combination of movie quality "STD" and 16:9 mode "On". Replace the disc with a DVD-RAM or DVD-RW (VRmode) for dubbing. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode), "+RW" will appear when using a +RW. DVD-R*, Different video mode, 16:9 and 4:3 mode cannot exist together. With a DVD-RW (VF-mode)/DVD-R, the movie quality mode and 16:9 mode cannot be changed in the middle of disc: Change the movie to be dubbed or replace the disc with a DVD-RAM or DVDRW (VR-mode). * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). DVD-R*, 16:9 mode cannot be changed, when Video mode is STD. With DVD-RW (VF-mode)/DVD-R/+RW, the setting of 16:9 mode will not be possible when the Video mode is STD. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode), "+RW" will appear when using a +RW. DVD-R*, Input Source cannot be changed. Once a DVD-RW (VF-mode)/DVD-R has been recorded in the 16:9 mode, the input source will not be changeable. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). DVD-R*, Video mode and 16:9 mode cannot be changed. With DVD-RW (VF-mode)/DVD-R, the movie quality mode and 16:9 mode once used for recording cannot be changed. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). Reference page 26 31 109 11, 24 105 80 114 31 80 63 63 63 63 141