Hitachi DZHS500A Owners Guide - Page 38
Inserting and Removing Disc
UPC - 050585223943
View all Hitachi DZHS500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
English 12/ Inserting and Removing Disc 1 Set the power switch to "DVD" or "OFF" . When the power switch is set to "HDD" or "SD", the cover of disc insertion block will not open. When "Please insert DVD." appears during dubbing, however, the cover of disc insertion block will open even when the power switch is set to "HDD" (see p. 80). 2 Press down the DISC EJECT button once and release it. A few moments after the ACCESS/PC indicator blinks, the cover of disc insertion block will open. 3 Gently open the cover by hand fully until it stops. When removing the disc: While pushing down the center portion of turntable, pick up the disc, holding its edge, to remove it. Turntable Pickup lens 4 When inserting a disc: Push the disc against the turntable at the center to lock it until a click is heard. Push the shaded portion. • Note that the recording surface of disc must face the inside of DVD video camera/recorder. When using a single-sided disc, the recording surface is the side without label. • Never touch the disc recording surface or pickup lens. Touching the pickup lens could cause a fault. • Use the disc cleaning cloth provided to wipe off any dirt adhering to the disc recording surface. • Do not use a dirtied or scratched disc. 5 Push the section marked "PUSH CLOSE" on the cover of disc insertion block, to close the cover. Then the DVD video camera/recorder will automatically recognize the disc: While the ACCESS/PC indicator is lit, do not cut off the power supply, and do not subject the DVD video camera/recorder to any vibrations or impact. 38