IBM 2498-B40 User Guide - Page 61
Appendix. Product specifications, Weight and physical dimensions, Facility requirements
View all IBM 2498-B40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Appendix. Product specifications This appendix provides the specifications for the SAN48B-5 switch. v "Weight and physical dimensions" v "Facility requirements" v "Power supply specifications" on page 36 v "Environmental requirements" on page 36 v "General specifications" on page 37 v "Data transmission ranges" on page 38 v "Memory specifications" on page 38 v "Fibre Channel port specifications" on page 39 v "Serial port specifications" on page 39 Weight and physical dimensions Table 8 lists the dimensions and weight of the switch. Table 8. Switch dimensions Dimension Height Depth Width Weight (with two power supply and fan assemblies, and no SFP+s installed) Value 1U = 4.3 cm (1.7 in) 44.3 cm (17.4 in) 43.8 cm (17.2 in) Note the slightly increased width, which requires a slim rail rack mount kit for mounting. 9.2 kg (20.2 lb) Facility requirements Table 9 provides the facility requirements that must be met for the switch. Table 9. Facility requirements Type Requirement Electrical v Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the switch nameplate v Circuit protected by a circuit breaker and grounded in accordance with local electrical codes Refer to Table 10 on page 36 for complete power supply specifications. Thermal v A minimum air flow of 79.8 cubic meters/hour (47 cubic ft/min.) available in the immediate vicinity of the switch v Ambient air temperature not exceeding 40° C (104° F) while the switch is operating © Copyright IBM Corp. 2011 35