IBM 2498-B40 User Guide - Page 62
Power supply specifications, Environmental requirements, Requirement, Specification, Value, Condition - power consumption
View all IBM 2498-B40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Table 9. Facility requirements (continued) Type Requirement Cabinet (when rack-mounted) v One rack unit (1U) in a 48.3 cm (19-inch) cabinet-must use the slim-rail rack kits designed for the extra width of the switch to mount in standard cabinets/racks v All equipment in cabinet grounded through a reliable branch circuit connection v Additional weight of switch not to exceed the cabinet's weight limits v Cabinet secured to ensure stability in case of unexpected movement Power supply specifications The power supplies are universal and capable of functioning worldwide without voltage jumpers or switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of accommodating input voltages and line frequencies. Each power supply has built-in fans for cooling. Table 10 lists the power supply specifications for the switch. Table 10. Power supply specifications Specification Value Input voltage Range: 85-264 VAC Auto-volt, Nominal: 100-240 VAC, 2.0A, 47-63 Hz; switch autosenses input voltage. Input frequency Range: 47-63 Hz; Nominal: 50-60 Hz. Inrush current Limited to 50A peak @ 240Vac for any initial current surge or spike of 10ms or less at cold start-up. Any additional inrush current surges or spikes in the form of AC cycles or multiple AC cycles greater than 10ms, and less than 150ms, must not exceed 15A peak. Power supply output (each) 150 watts @ 12V DC Maximum current 12.5A @ 12V DC. Input line protection Both AC lines are fused. System power consumption 110 W with all 48 ports populated with 16 Gbps SWL optics 72 W with empty chassis and no optics. Environmental requirements Table 11 lists the acceptable environmental ranges for both operating and non-operating (such as during transportation or storage) conditions. Table 11. Environmental requirements Condition Acceptable range during operation Ambient temperature Humidity 0° to +40°C (32° to 104°F) 10% to 85% RH non-condensing, at 40°C (104°F), Acceptable range during non-operation -25° to 70°C (-13° to 158°F) 10% to 90% RH non-condensing, at 70°C (158°F) 36 SAN48B-5 Installation, Service, and User Guide