IBM 3580-L23 Setup Guide - Page 82
followed by, The tape drive copies the FMR data to the scratch data cartridge.
View all IBM 3580-L23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Maint Mode: Select Exit Maint Mode Note: If a cartridge is in the tape drive, it will eject the first time that you press the unload button and the drive will not be placed in maintenance mode. To continue placing the drive in maintenance mode, perform the preceding step. 4. Press the unload button once per second until 3 appears in the single-character display and the following message displays. (If you cycle past the desired code, press the unload button once per second until the code redisplays.) Maint Mode: Select Create FMR Tape 5. Press and hold the unload button for 3 or more seconds, then release it to select the function. Immediately after the following message displays, insert a scratch (blank) data cartridge that is not write protected (or the tape drive exits maintenance mode). Create FMR Tape Load Scratch Tape After you insert the scratch data cartridge, the flashing C in the single-character display changes to 3 and the following message displays: Create FMR Tape Tape Loading = = = > followed by: Create FMR Tape Writing = = = > The tape drive copies the FMR data to the scratch data cartridge. Note: If you inserted an invalid or write-protected tape cartridge, 7 appears in the single-character display. The tape drive unloads the cartridge and exits maintenance mode. v If the tape drive creates the FMR tape successfully, it rewinds and unloads the new tape, exits maintenance mode, and is ready to use the tape. The following message displays: Create FMR Tape Completed! followed by: Cartridge Unloading In Progress 66 IBM 3580 Ultrium Tape Drive Setup and Operator Guide