IBM 3580-L23 Setup Guide - Page 94
If you inserted an invalid or write-protected tape cartridge
View all IBM 3580-L23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Maint Mode: Select Fast R/W Diagnostic 5. Press and hold the unload button for 3 or more seconds, then release it to select the function. Immediately after the following message displays, insert a scratch (blank) data cartridge that is not write-protected (or the tape drive exits maintenance mode). Fast R/W Diagnostic Load Scratch Tape 6. After you insert the scratch data cartridge, the flashing C in the single-character display changes to F and one or more of the following messages display: Fast R/W Diagnostic Tape Loading = = = > Fast R/W Diagnostic Locating = = = > Fast R/W Diagnostic Rewinding = = = > followed by: Fast R/W Diagnostic Writing = = = > and: Fast R/W Diagnostic Reading = = = > The tape drive runs the tests. Note: If you inserted an invalid or write-protected tape cartridge, 7 appears in the single-character display. The tape drive unloads the cartridge and exits maintenance mode. v If no error is detected, the test will loop and begin again. To stop the loop, press the unload button for one second and release. When the loop ends, 0 temporarily appears in the single-character display. The drive rewinds and unloads the tape, partially ejects the cartridge, then exits maintenance mode. The solid amber status light turns off and the following message displays: Passed! Tape Unloading followed by: Cartridge Unloading In Progress 78 IBM 3580 Ultrium Tape Drive Setup and Operator Guide