IBM 867431X Hardware Maintenance Manual - Page 121
FRU information (service only), Diskette/CD-ROM drives
![]() |
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
FRU information (service only) Field Replacement Units (FRUs) should be replaced by qualified service personnel only. Note: Read"Safety information" on page 147 and "Before you begin" on page 45. Diskette/CD-ROM drives To remove the diskette/CD-ROM drive: 1. Power off the server/workstation. 2. Remove the cover. See "Removing the cover" on page 48. 3. Disconnect the cables for the floppy disk drive and the CD-ROM drive from the system board. 4. Remove the fans. See "Fan assembly replacement" on page 92. 5. Remove the screws. 6. Gently pull the CD-ROM/diskette drive subassembly up and back simultaneously to remove it from the system. © Copyright IBM Corp. 2001 113
![](/manual_guide/products/ibm-867413x-hardware-maintenance-manual-87339a7/121.png)
FRU information (service only)
Field Replacement Units (FRUs) should be replaced by qualified service personnel
only.
Note:
Read
“
Safety information
”
on page 147 and
“
Before you begin
”
on page 45.
Diskette/CD-ROM drives
To remove the diskette/CD-ROM drive:
1.
Power off the server/workstation.
2.
Remove the cover. See
“
Removing the cover
”
on page 48.
3.
Disconnect the cables for the floppy disk drive and the CD-ROM drive from
the system board.
4.
Remove the fans. See
“
Fan assembly replacement
”
on page 92.
5.
Remove the screws.
6.
Gently pull the CD-ROM/diskette drive subassembly up and back
simultaneously to remove it from the system.
© Copyright IBM Corp. 2001
113