IBM 867431X Hardware Maintenance Manual - Page 81
Configuring the serial port, Host Name, Disabled, Exit Utility, Configuration, Settings
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Host Name Type the IP hostname of the Remote Supervisor Adapter. The default hostname is ASMA. For detailed information about the Ethernet settings, see the IBM Remote Supervisor Adapter User's Guide for the xSeries 330. 7. You must change the DHCP Setting field to Disabled. The default value is Enabled. 8. Press F6 to apply the change. 9. Press Esc. In the Warning window that opens, press Enter to restart the Remote Supervisor Adapter. 10. Press Esc to return to the Configuration Settings window. 11. If you need to configure the serial port, go to "Configuring the serial port"; otherwise continue with step 12. 12. Press Esc to return to the Utility program main window. 13. Use the arrow keys to select Exit Utility from the menu or press Esc to close the Utility program. 14. Remove the CD from the CD-ROM drive. The Remote Supervisor Adapter restarts automatically. Continue with "Completing the installation" on page 76. Configuring the serial port To configure the Remote Supervisor Adapter serial port for access using a modem or null modem, complete the following steps: 1. If you completed the procedure for configuring the Ethernet port and the Configuration Settings window is open, go to step 5; otherwise, continue with step 2. 2. Turn on the server. 3. Insert the IBM Remote Supervisor Adapter Support CD into the CD-ROM drive and close the CD-ROM drive before the server completes POST. The CD starts automatically and the IBM Remote Supervisor Utility window opens. Note: If you do not insert the CD and close the CD-ROM drive before POST completes, you must restart the server with the CD in the CD-ROM drive. 4. Use the Up Arrown and Down Arrow keys (↑ and ↓) to select Configuration Settings; then, press Enter. The Configuration Settings window opens. 5. Use the arrow keys to select Modem Settings; then, press Enter. The Modem Settings window opens. Installing options 73