IBM 867431X Hardware Maintenance Manual - Page 133

Error Code/Symptom FRU/Action 206-XXX-000 (Failed Diskette Drive test) 1. Try test with another diskette 2. Cable 3. Diskette Drive 4. System Board 215-XXX-000 (Failed IDE CD-ROM test) 1. CD-ROM Drive Cables 2. CD-ROM Drive 3. System Board 217-198-XXX (Could not establish drive parameters) 1. Check cable and termination 2. SCSI backplane 3. Fixed disk 217-XXX-000 (Failed Fixed Disk test) 1. Fixed Disk 1 Note: If RAID is configured, the fixed disk number refers to the RAID logical array 2. System Board 217-XXX-001 (Failed BIOS Fixed Disk test) 1. Fixed Disk 2 Note: If RAID is configured, the fixed disk number refers to the RAID logical array 2. System Board 264-XXX-0NN (Failed Tape Drive test) 1. Tape Cartridge, if user executed the Read/Write Tape Drive test (failure code of XXX = 256) 2. SCSI or Power Cable connected to tape drive with SCSI ID NN. 3. Tape Drive with SCSI ID NN. (Refer to the Help and Service Information appendix of the tape drive's User Guide.) 4. System Board or SCSI Controller. (Run SCSI Controller Diagnostic to determine if the SCSI bus is functioning properly.) 264-XXX-999 (Errors on multiple tape drives, see error text for more info) 1. See error messages/text in the PC Doctor error log for detailed information on each individual tape drive error. 301-XXX-000 (Failed Keyboard test) 1. Keyboard 2. System Board 405-XXX-000 (Failed Ethernet test on controller on the System Board) 1. Verify that Ethernet is not disabled in BIOS. 2. System Board 405-XXX-A0N (Failed Ethernet test on adapter in slot A) 1. For A=0, system board 2. For A >0, adapter in PCI slot A 415-XXX-000 (Failed Modem test) 1. Cable Note: Ensure modem is present and attached to server/workstation. 2. Modem 3. System Board Error symptoms Error Symptom CD is not working properly. FRU/Action 1. Clean the CD. 2. Run CD-ROM diagnostics 3. CD-ROM Drive Symptom-to-FRU index 125