IBM 867431X Hardware Maintenance Manual - Page 143
Terminator Card, Power Supply
![]() |
View all IBM 867431X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
a) 1 Power Supply b) System Board c) 1 Microprocessor d) 1 Terminator Card e) Memory Module (with a minimum of 128 MB DIMM) 4) Power-on system. If problem remains, suspect the following FRUs in the order listed: a) Power supply b) System board If problem goes away, replace removed items one at a time until failing item is found (power-on and reconfigure system each time). Notes: 1. If the problem goes away when you remove an adapter from the system, and replacing that adapter does not correct the problem, suspect the System Board. 2. If you suspect a networking problem and all the system tests pass, suspect a network cabling problem external to the system. Symptom-to-FRU index 135
![](/manual_guide/products/ibm-867413x-hardware-maintenance-manual-87339a7/143.png)
a)
1 Power Supply
b)
System Board
c)
1 Microprocessor
d)
1 Terminator Card
e)
Memory Module (with a minimum of 128 MB DIMM)
4)
Power-on system. If problem remains, suspect the following FRUs in the
order listed:
a)
Power supply
b)
System board
If problem goes away, replace removed items one at a time until failing
item is found (power-on and reconfigure system each time).
Notes:
1.
If the problem goes away when you remove an adapter from the system, and
replacing that adapter does not correct the problem, suspect the System Board.
2.
If you suspect a networking problem and all the system tests pass, suspect a
network cabling problem external to the system.
Symptom-to-FRU index
135