Icom ID-51A PLUS2 Advanced Owners Manual - Page 103
Using the EMR communication function
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Previous view 9 D-STAR OPERATION ■■Using the EMR communication function The EMR (Enhanced Monitor Request) communication function can be used in only the DV mode. Using the EMR function, no call sign setting is necessary. All transceivers that receive an EMR signal automatically open their squelch to receive the signal. When an EMR signal is received, the audio will be heard at the preset level, even if the volume setting level is set to the minimum level, or the digital call sign/digital code squelch is used. (Default: OFF) If the volume setting level is higher than the EMR set level, the audio will be heard at the higher volume setting level. Example: To transmit from the "Hamacho" repeater using the EMR function NOTE: The EMR function is automatically turned OFF when the transceiver is turned OFF. qqHold down for 1 second. • The DR screen is displayed. wwPush D-pad() to select "FROM," and then push D- pad(Ent). D-pad (Ent) () eePush D-pad() to select "Repeater List," and then push D-pad(Ent). rrPush D-pad() to select "11: Japan," and then push D-pad(Ent). ttP ush D-pad() to select "Hamacho," and then push D-pad(Ent). • "Hamacho" is displayed on "FROM". yyPush [MENU] . uuP ush D-pad() to select the root item ("DV Set"), and then push D-pad(Ent). iiPush D-pad() to select "EMR," and then push D- pad(Ent). ooPush D-pad() to select "ON." !0 Push [MENU] to exit the MENU screen. • "EMR" appears. !1 Push [PTT] to transmit. • The TX/RX indicator lights red. • "EMR" blinks on a station that receives the EMR signal. And the audio (voice) will be heard at the specified level, or the [VOL] control level, whichever is higher. !2 Release [PTT] to receive. !3 To cancel the EMR function, select "OFF" in step o, as described above, or turn OFF the power. Appears 9-8