Home » Icom Manuals » Two-Way Radios » Icom ID-51A PLUS2 » Manual Viewer

Icom ID-51A PLUS2 Advanced Owners Manual - Page 377

Command table

Add to My Manuals
Save this manual to your list of manuals

Page 377 highlights

Previous view 17 OTHER FUNCTIONS ■■CI-V information (Continued) DDCommand table Cmd. Sub cmd. Data Description 00 see p. 17-24 Send operating frequency for transceive 01 see p. 17-24 Send operating mode for transceive 03 see p. 17-24 Read operating frequency 04 see p. 17-24 Read operating mode 05 see p. 17-24 Send operating frequency 06 see p. 17-24 Send operating mode 07 Select the VFO mode D0 Select A band Dualwatch: Set the Main band as the A band Single watch: Select the A band D1 Select B band Dualwatch: Set the Main band as the B band Single watch: Select the B band 0C see p. 17-24 Read frequency offset*1 0D see p. 17-24 Send frequency offset 0F Read duplex setting (10= simplex, 11= DUP-, 12= DUP+) 10 Set simplex operation 11 Set DUP- operation 12 Set DUP+ operation 11 00 Send/read attenuator OFF (AIR band) 30 Send/read 30 dB attenuator (AIR band) 14 01 see p. 17-24 Send/read audio output level 03 see p. 17-24 Send/read squelch level 0A see p. 17-24 Send/read RF power setting 0B see p. 17-24 Send/read external microphone gain. 16 see p. 17-24 Send/read VOX gain. 15 01 00 Read noise/S-meter squelch status (squelch close) 01 Read noise/S-meter squelch status (squelch open) 02 0000 to 0255 Read S-meter level (0000= S0, 0170= S9) 05 00 Read tone squelch and RF squelch status (squelch close) 01 Read tone squelch and RF squelch status (squelch open) 11 0000 to 0255 Read RF power meter (0005= S-LOW, 0026= LOW1, 0051= LOW2, 0128= MID, 0255= HIGH) 16 42 00 Send/read Repeater tone OFF 01 Send/read Repeater tone ON 43 00 Send/read Tone squelch OFF 01 Send/read Tone squelch ON 02 Send/read Reversed Tone squelch ON 46 00 Send/read VOX function OFF 01 Send/read VOX function ON 4B 00 Send/read DTCS OFF 01 Send/read DTCS ON 02 Send/read Reversed DTCS ON 59 00 Send/read Sub band OFF 01 Send/read Sub band ON 5B 00 Send/read DSQL/CSQL OFF (DV mode only) 01 Send/read DSQL ON (DV mode only) 02 Send/read CSQL ON (DV mode only) 5C 00, 01, 02 Send/read GPS TX mode (00= OFF, 01= D-PRS, 02= NMEA) 5D 00 to 09 Send Tone setting (00= OFF, 01= TONE, 02= TSQL, 03=DTCS, 04=TSQL-R, 05=DTCS-R, 06=DTCS(T), 07=TONE(T)/DTCS(R), 08=DTCS(T)/TSQL(R), 09=TONE(T)/TSQL(R)) 18 00 Turning the transceiver power OFF 01 Turning the transceiver power ON*2 19 00 Read transceiver ID. Cmd. Sub cmd. Data Description 1B 00 see p. 17-24 Send/read Repeater tone frequency 01 see p. 17-24 Send/read Tone squelch frequency 02 see p. 17-25 Send/read DTCS code and polarity 07 see p. 17-25 Send/read CSQL code (DV mode) 1C 00 00 Send/read Transceiver's status (RX) 01 Send/read Transceiver's status (TX) 1F 00 see p. 17-25 Send/read DV MY call sign 01 see p. 17-25 Send/read DV TX call signs 02 see p. 17-25 Send/read DV TX message 20 00 00 00*3 Send/read Auto DV RX Call signs output OFF 01*3 Send/read Auto DV RX Call signs output ON 01 see p. 17-26 Output DV RX Call signs 02 see p. 17-26 Read DV RX Call signs 01 00 00*3 Send/read Auto DV RX message output OFF 01*3 Send/read Auto DV RX message output ON 01 see p. 17-26 Output DV RX message 02 see p. 17-26 Read DV RX message 02 00 00*3 Send/read Auto DV RX status output OFF 01*3 Send/read Auto DV RX status output ON 01 see p. 17-25 Output DV RX status 02 see p. 17-25 Read DV RX status 03 00 00 Send/read Auto DV RX GPS/D-PRS data output OFF 01 Send/read Auto DV RX GPS/D-PRS data output ON 01 see p. 17-26 Output DV RX GPS/D-PRS data for transceive ~ p. 17-28 02 see p. 17-26 Read DV RX GPS/D-PRS data for transceive ~ p. 17-28 04 00 00 Send/read Auto DV RX GPS/D-PRS message output OFF 01 Send/read Auto DV RX GPS/D-PRS message output ON 01 see p. 17-28 Output DV RX GPS/D-PRS message for transceive 02 see p. 17-28 Read DV RX GPS/D-PRS message for transceive 22 00 see p. 17-28 Send/read DV TX data (Up to 30 bytes) 01 00 00 Send/read Auto DV RX data output OFF 01 Send/read Auto DV RX data output ON 01 see p. 17-28 Send/read DV RX data (Up to 30 byte) 02 00, 01 Send/read DV data TX setting (00=PTT, 01=Auto) 03 00, 01 Send/read DV fast data setting (00=OFF, 01=ON) 04 00, 01 Send/read GPS Data Speed setting (00=Slow, 01=Fast) 05 00~10 Send/read TX Delay (PTT) setting (00=OFF, 01=1 sec. ~ 10=10 sec.) *1: Less than 100 Hz is omitted. *2: When sending the power ON command (18 01), the command "FE" must be sent before the basic format. • 19200bps: 50 • 9600bps: 26 • 4800bps: 14 • 1200bps: 5 • 300bps: 3 Example: When operating with 4800 bps q w e r t u FEF EFE 86EO 1 8 01 F D ×14 q Preamble code (fixed) w Transceiver's default address e Controller's default address r Command number t Sub command number u End of message code (fixed) *3: Output setting is automatically turned OFF after turning the power OFF, then ON. 17-23

Section	Page
Top page	1
INTRODUCTION	2
About these Advanced Instructions (PDF format)	2
Functions and features of Adobe® Reader®	3
Section 1 ACCESSORY ATTACHMENT	4
■Antenna	5
■Battery pack	5
■Belt clip	6
■Hand strap	6
Section 2 USING A microSD CARD	7
■About the microSD card	8
■Saving data onto the microSD card	8
■Inserting the microSD card	9
◇Formatting the microSD card	10
■Removing the microSD card	11
■Saving data onto a microSD card	12
■Saving with a different file name	14
■Loading the saved data files that are on the microSD card	16
■Backing up the data stored on the microSD card onto a PC	18
◇About the microSD card’s folder	18
◇Making a backup file on your PC	19
■Importing or Exporting a CSV format file	20
◇Importing	20
◇Exporting	21
Section 3 PANEL DESCRIPTION	22
■Front, top and side panels	23
■Function display	26
Section 4 BATTERY CHARGING	29
■Battery information	30
◇Battery life	30
◇Battery icon	30
■Charging through the [DC IN] jack	31
◇Battery icon	31
◇Charging note	31
■Optional battery case	32
◇Battery life	32
◇About the battery replacement	32
■Charging with the optional desktop charger	33
◇Charging note	33
■External DC power operation	34
◇Operating note	34
Section 5 BASIC OPERATION	35
■Turning ON power	36
■Adjusting the audio level	36
■Dualwatch operation	37
◇MAIN band selection	37
◇Single watch operation	37
◇Audio mute during Dualwatch operation	38
◇Setting the volume for Dualwatch	39
■Selecting the operating band	40
■Selecting the tuning step	41
◇Tuning step selection	41
■Setting a frequency	42
■Setting the squelch level	42
■Selecting the operating mode	43
■Monitor function	43
■Selecting the Mode	44
◇VFO mode	44
◇Memory/Call channel/Weather channel* mode	44
◇DR (D-STAR Repeater) function	44
■Transmitting	45
◇About transmit power levels	45
■Key Lock function	46
■ATT (AIR) function	46
■Band Scope function	47
◇Sweep operation	47
■Weather channel operation (U.S.A. version transceivers only)	48
◇Weather channel selection	48
◇Weather alert function	48
Section 6 BC RADIO OPERATION	49
■Basic operation	50
◇Description	50
◇Turning ON the BC Radio	50
◇Listening to the BC Radio while monitoring two ham bands	51
◇Selecting the BC radio mode	51
◇Selecting the bank in the Memory bank mode	52
◇Selecting the AM/FM radio mode	53
◇Searching for a BC Radio signal	53
◇Using the Attenuator function	54
◇Setting the squelch level	55
◇Using the Monitor function	55
◇Setting a tuning step (AM Only)	56
■Adding or editing a BC Radio memory	57
◇Using the BC Radio Memory	57
◇Add a BC Radio memory	57
◇Deleting a BC Radio memory	60
◇Editing a BC radio memory	61
◇Rearranging the display order of the BC Radio memory	62
■Skip setting for the BC radio memory	63
■Using the BC Radio Mode	64
■BC Radio settings	65
◇FM Antenna	65
◇Power Save (BC Radio)	65
◇Auto Mute	66
◇Volume Select	67
◇BC Radio Level	68
Section 7 D-STAR INTRODUCTION	69
■D-STAR Introduction	70
■About the DR (D-STAR Repeater) function	70
■Ways to Communicate using the DR function	71
Section 8 D-STAR OPERATION <BASIC>	72
■Setting “FROM” (Access repeater)	73
◇Using the preloaded Repeater List	74
◇Using the DR scan	75
◇Using the Repeater Search function	76
◇Using the TX History	78
■Setting “TO” (Destination)	79
◇Using “Local CQ” (Local Area call)	80
◇Using “Gateway CQ” (Gateway call)	81
◇Using “Your Call Sign”	82
◇Using the RX History	83
◇Using the TX History	84
◇Directly inputting (UR)	85
◇Directly inputting (RPT)	86
■Reflector operation	87
◇What is the reflector?	87
◇Linking to a reflector	88
◇Using a reflector	89
◇Unlinking a reflector	90
◇Reflector Echo Testing	90
◇Requesting repeater information	91
■Updating the Repeater List	92
Section 9 D-STAR OPERATION <ADVANCED>	96
■Message operation	97
◇Entering a TX message	97
◇Transmitting a message	98
◇Deleting a TX message	99
■Viewing received call signs	100
◇Viewing the RX History screen	100
■Using the BK function	102
■Using the EMR communication function	103
◇Adjusting the EMR AF level	104
■Display type setting	104
■Automatic DV detection	105
■Automatic Reply function	106
◇Recording an Auto Reply voice announcement	107
◇Playing back the recorded voice audio	107
◇Auto Position Reply function	108
■Data communication	109
◇Connection	109
◇Data communication application setting	109
◇Data communication operation	109
◇DV fast data mode	110
■Speech function	111
◇Announcing the received call sign	111
◇To announce the RX>CS call sign	112
◇Selecting the Speech Language	113
◇Phonetic Code setting for the Speech alphabetcharacter	113
◇Speech speed selection	114
◇Speech level selection	114
■Digital squelch functions	115
◇The digital call sign squelch setting	115
◇Pocket beep function with the digital callsign squelch	115
◇Setting the digital code squelch	116
◇Pocket beep function with the digital code squelch	116
■Viewing the call signs	117
■Repeater List	118
◇Repeater List contents	118
■Entering information into Repeater List	119
◇Required items for the communication cases	119
◇New repeater entry	120
■Editing a Repeater List	130
■Deleting a Repeater List	131
■Rearranging the repeater display order	132
■Adding Repeater information using RX History	133
■Skip settings for the DR scan	134
◇Individual skip setting	134
◇Group skip setting	135
■Entering the repeater group name	136
■Repeater detail screen	137
■Entering the Your (destination) call sign	138
■Deleting Your (destination) call sign	140
■Rearranging the display order of Your (destination) call sign	141
■About the Repeater List default values	142
◇Opening the default Repeater List	142
■Is your setting correct?	143
Section 10 GPS OPERATION	144
■GPS operation	145
◇Receiving GPS data	145
■Checking GPS Position	146
◇Displaying Position Data	146
◇Caller’s TX format	148
◇Displayed items	149
◇TX format: D-PRS Position (Mobile)	150
◇TX format: D-PRS Position (Base)	150
◇TX format: D-PRS Object	151
◇TX format: D-PRS Item	151
◇TX format: D-PRS Weather	152
◇TX mode: NMEA	152
◇Changing the GPS memory/alarm channel	153
◇Changing the Grid Locator	153
◇Changing the Compass Direction	153
◇Saving your own or received position data	154
■Checking GPS Information (Sky view screen)	155
■GPS memory operation	156
◇GPS Memory	156
◇Add a GPS memory	156
◇Entering the GPS group name	161
◇Deleting GPS data	162
◇Rearranging the display order of the GPS memory	163
◇Setting the GPS alarm	164
■Transmitting GPS data (D-PRS and NMEA)	166
◇Type of position data	166
■Transmitting D-PRS (DV-A) data	167
◇D-PRS	167
◇Operating D-PRS (DV-A)	167
◇Setting D-PRS (DV-A)	168
◇Displaying your position using a mapping program	172
■Transmitting NMEA (DV-G) data	174
◇Setting the GPS data sentence	174
◇Entering a GPS message	175
■GPS Auto transmission	176
◇Setting the GPS automatic transmission	176
■GPS Logger function	177
◇GPS Logger operating outline	177
◇Setting the GPS Logger function	177
◇Setting the GPS record interval	178
◇Setting the GPS record sentence	178
◇Viewing the route on a PC Map	179
◇Using <<GPS Logger Only>> mode	181
Section 11 VOICE MEMORY FUNCTION	182
■Recording a QSO audio	183
◇To start recording	183
◇To stop recording	184
■Playing back the recorded audio	185
■Operations while playing back	186
◇Fast-forward while playing	186
◇Rewind while playing	186
◇Pause while playing	186
◇Playing the previously file	186
◇Playing the next file	186
◇Pause at the beginning of the previouslyfile (Fast forward the file)	186
◇Pause at the beginning of the next file (Rewind the file)	186
■VOICE PLAYER screen’s description	187
■Changing the skip time	188
■Deleting the recorded contents (audio)	189
■Deleting the folder	190
■Changing the recording mode	191
■Continue to record even if no signals are received	192
■Record the transmit and receive audio into the same file	193
■Start to record when the [PTT] switch is pushed	194
■Viewing the file information	195
■Viewing the folder information	196
■Voice Recorder function	197
◇To start recording	197
◇Playing back the recorded audio	198
◇Erasing the recorded audio contents	199
◇MIC Gain setting	200
◇Changing the skip time	201
◇Viewing the file information	202
■Viewing the microSD card’s free space and recordable time	203
■Playing back the voice memory data on a PC	204
Section 12 MEMORY OPERATION	205
■General description	206
◇Memory channel contents	206
■Selecting a Memory channel	207
■Selecting a call channel	207
■Entering a Memory channel	208
■Copying memory and Call channel contents	209
◇Memory or Call channe -> VFO	209
◇Memory or Call channel -> Another memory or Call channel	210
■Setting a Memory bank	211
◇Assigning a memory channel to a memory bank	211
◇Directly entering into a memory bank	212
■Selecting a Memory bank	213
■Entering a memory/bank/scan name	214
◇Entering a memory name, bank name or scan name	214
■Selecting a memory name display	216
■Clearing a Memory contents	217
Section 13 SCAN OPERATION	218
■Scan	219
◇About the scan function	219
◇VFO scan	219
◇Memory scan	219
◇Memory bank scan	219
◇Scanning direction	220
◇Squelch setting for a scan	220
◇Tuning step for a VFO scan	220
◇Skip function	220
◇Temporary Skip timer	220
◇Receive mode for a scan	220
◇When a signal is received	221
◇Scan name	221
◇Scan Stop Beep function	221
◇Scan function during Dualwatch operation	221
■VFO scan	222
◇VFO mode scan	222
■Setting and clearing the skip frequencies	224
◇Setting the skip frequencies	224
◇Clearing the skip setting	225
■Memory scan	226
◇Memory (skip) scan	226
◇Memory bank scan	227
■Setting the skip channel	229
■Setting the temporary skip function	230
Section 14 PRIORITY WATCH	231
■Priority watch	232
◇VFO frequency and a priority channel	232
◇VFO frequency and a Memory/Bank scan	232
◇VFO scan and a priority channel	232
◇VFO scan and a Memory/Bank scan	232
◇A frequency in “FROM” on the DR screen and a priority channel	233
◇DR scan and a priority channel	233
■VFO frequency and a priority channel	234
■VFO frequency and a Memory/Bank scan	236
■VFO scan and a priority channel	238
■VFO scan and Memory/Bank scan	240
■A frequency in “FROM” on the DR screen and a priority channel	243
■DR scan and a priority channel	246
Section 15 REPEATER AND DUPLEX OPERATIONS	249
■FM Repeater operation	250
◇Checking the repeater input signal	251
■Duplex operation	252
◇Setting the frequency offset	252
◇Setting the duplex direction	253
◇Duplex operation	253
■Off band indication	253
■Auto repeater function	254
◇Auto repeater setting	254
■1750 Hz tone	255
Section 16 MENU SCREEN	256
■Menu item selection	257
◇Entering the Menu screen	258
■Menu items and Default settings	259
■DUP/TONE items	271
■Scan items	273
■Voice Memo items	277
■Voice TX items	283
■Broadcast (BC) Radio items	285
■GPS items	287
■Call sign items	306
■RX History items	308
■DV Memory items	311
■My Station items	314
■DV Set items	315
■SPEECH items	321
■DTMF/T-CALL items	323
■QSO/RX Log items	324
■Function items	327
■Display items	335
■Sounds items	343
■Time set items	347
■DV Gateway items	349
■SD Card items	350
■Others items	352
Section 17 OTHER FUNCTIONS	355
■Voice TX function	356
◇Recording	356
◇The recorded voice audio playing back	356
◇To transmit the recorded voice audio	357
◇Repeat Time setting	358
◇TX Monitor function	358
■Home CH Beep function	359
◇Home CH setting	359
◇Home CH operation	359
■Speech function	360
◇[DIAL] speech function setting	360
◇Mode speech function setting	361
■Using the DTMF memory	362
◇DTMF code programming	362
◇Monitoring the stored DTMF code	363
◇DTMF code transmission	364
◇DTMF code transmission (Direct Input)	365
◇Setting DTMF transfer speed	366
■Tone squelch operation	367
◇Tone squelch frequency setting and operation	367
■DTCS squelch operation	369
◇DTCS code setting and operation	369
■Cloning function	371
◇Transceiver-to-Transceiver cloning using a microSD card	371
◇Cloning from a PC using a microSD card	374
◇Cloning from a PC using an optional data cable	374
◇Transceiver-to-Transceiver cloning using a cable	375
■CI-V information	376
◇CI-V data setting	376
◇CI-V connection example	376
◇Data format	376
◇Command table	377
Section 18 OPTIONS	383
■Option list	384
■Optional HM-75LS remote control speaker microphone	386
◇Remote control function setting	386
■VOX function	387
◇Optional unit connection	387
◇Selecting the headset type	387
◇Turning the VOX function ON or OFF	388
◇VOX Level setting	389
◇VOX-related settings	390
■SJ-1 silicone jacket	390
■Using the RS-MS1A	391
◇Required items	391
◇Connection	391
◇Download procedures	391
Section 19 SPECIFICATIONS	392
■Transceiver	393
◇General	393
◇Transmitter	393
◇Receiver	394
■BC-202 DESKTOP CHARGER	394
TROUBLESHOOTING	395
◇While operating D-STAR	395
◇While operating GPS Logger	396
◇Others	397
INDEX	399
INDEX FOR MENU ITEMS	407

Match case Limit results 1 per page

OTHER FUNCTIONS

17-23

■

CI-V information (Continued)

Command table

Cmd.

Sub

cmd.

Data

Description

see p. 17-24

Send operating frequency for transceive

see p. 17-24

Send operating mode for transceive

see p. 17-24

Read operating frequency

see p. 17-24

Read operating mode

see p. 17-24

Send operating frequency

see p. 17-24

Send operating mode

Select the VFO mode

Select A band

Dualwatch: Set the Main band as the A band

Single watch: Select the A band

Select B band

Dualwatch: Set the Main band as the B band

Single watch: Select the B band

see p. 17-24

Read frequency offset*

see p. 17-24

Send frequency offset

Read duplex setting

(10= simplex, 11= DUP–, 12= DUP+)

Set simplex operation

Set DUP– operation

Set DUP+ operation

Send/read attenuator OFF (AIR band)

Send/read 30 dB attenuator (AIR band)

see p. 17-24

Send/read audio output level

see p. 17-24

Send/read squelch level

see p. 17-24

Send/read RF power setting

see p. 17-24

Send/read external microphone gain.

see p. 17-24

Send/read VOX gain.

Read noise/S-meter squelch status (squelch

close)

Read noise/S-meter squelch status (squelch

open)

0000 to

0255

Read S-meter level (0000= S0, 0170= S9)

Read tone squelch and RF squelch status

(squelch close)

Read tone squelch and RF squelch status

(squelch open)

0000 to

0255

Read RF power meter

(0005= S-LOW, 0026= LOW1, 0051= LOW2,

0128= MID, 0255= HIGH)

Send/read Repeater tone OFF

Send/read Repeater tone ON

Send/read Tone squelch OFF

Send/read Tone squelch ON

Send/read Reversed Tone squelch ON

Send/read VOX function OFF

Send/read VOX function ON

Send/read DTCS OFF

Send/read DTCS ON

Send/read Reversed DTCS ON

Send/read Sub band OFF

Send/read Sub band ON

Send/read DSQL/CSQL OFF (DV mode only)

Send/read DSQL ON (DV mode only)

Send/read CSQL ON (DV mode only)

00, 01, 02

Send/read GPS TX mode

(00= OFF, 01= D-PRS, 02= NMEA)

00 to 09

Send Tone setting

(00= OFF, 01= TONE, 02= TSQL, 03=DTCS,

04=TSQL-R, 05=DTCS-R, 06=DTCS(T),

07=TONE(T)/DTCS(R), 08=DTCS(T)/TSQL(R)

09=TONE(T)/TSQL(R))

Turning the transceiver power OFF

Turning the transceiver power ON*

Read transceiver ID.

Cmd.

Sub

cmd.

Data

Description

see p. 17-24

Send/read Repeater tone frequency

see p. 17-24

Send/read Tone squelch frequency

see p. 17-25

Send/read DTCS code and polarity

see p. 17-25

Send/read CSQL code (DV mode)

Send/read Transceiver’s status (RX)

Send/read Transceiver’s status (TX)

see p. 17-25

Send/read DV MY call sign

see p. 17-25

Send/read DV TX call signs

see p. 17-25

Send/read DV TX message

20 00

00*

Send/read Auto DV RX Call signs output OFF

01*

Send/read Auto DV RX Call signs output ON

see p. 17-26

Output DV RX Call signs

see p. 17-26

Read DV RX Call signs

00*

Send/read Auto DV RX message output OFF

01*

Send/read Auto DV RX message output ON

see p. 17-26

Output DV RX message

see p. 17-26

Read DV RX message

00*

Send/read Auto DV RX status output OFF

01*

Send/read Auto DV RX status output ON

see p. 17-25

Output DV RX status

see p. 17-25

Read DV RX status

Send/read Auto DV RX GPS/D-PRS data

output OFF

Send/read Auto DV RX GPS/D-PRS data

output ON

see p. 17-26

~ p. 17-28

Output DV RX GPS/D-PRS data for transceive

see p. 17-26

~ p. 17-28

Read DV RX GPS/D-PRS data for transceive

Send/read Auto DV RX GPS/D-PRS mes-

sage output OFF

Send/read Auto DV RX GPS/D-PRS mes-

sage output ON

see p. 17-28

Output DV RX GPS/D-PRS message for transceive

see p. 17-28

Read DV RX GPS/D-PRS message for transceive

see p. 17-28

Send/read DV TX data (Up to 30 bytes)

Send/read Auto DV RX data output OFF

Send/read Auto DV RX data output ON

see p. 17-28

Send/read DV RX data (Up to 30 byte)

00, 01

Send/read DV data TX setting (00=PTT, 01=Auto)

00, 01

Send/read DV fast data setting (00=OFF, 01=ON)

00, 01

Send/read GPS Data Speed setting

(00=Slow, 01=Fast)

00~10

Send/read TX Delay (PTT) setting

(00=OFF, 01=1 sec.

~ 10=10 sec.

)

: Less than 100 Hz is omitted.

: When sending the power ON command (18 01), the command

“FE” must be sent before the basic format.

• 19200bps: 50

• 9600bps: 26

• 4800bps: 14

• 1200bps: 5

• 300bps: 3

×14

Example: When operating with 4800 bps

Preamble code (ﬁxed)

Transceiver’s default address

Controller’s default address

Command number

Sub command number

End of message code (ﬁxed)

: Output setting is automatically turned OFF after turning the power

OFF, then ON.