Icom ID-51A PLUS2 Advanced Owners Manual - Page 344
Beep Level, Beep/Vol Level Link, Key-Touch Beep, Home CH Beep
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
Previous view 16 MENU SCREEN ■■Sounds items (Continued) Beep Level (Default: 3) Sounds > Beep Level Select a beep audio output level between 0 (OFF), 1 (minimum) and 9 (maximum). Beep/Vol Level Link (Default: OFF) Sounds > Beep/Vol Level Link Select whether or not the beep output level can be adjusted by the [VOL] control. • OFF: The output level is fixed to the level set in Beep Level. • ON: The output level can be adjusted by rotating [VOL]. Key-Touch Beep Sounds > Key-Touch Beep Turn the confirmation beep tones ON or OFF. • OFF: Turns the function OFF for silent operation. • ON: A beep sounds when a key is pushed. (Default: ON) NOTE: The beep tone sounds regardless of this setting when: - the power is turned ON - a matched tone signal is received if the pocket beep is activated. - the transceiver is automatically turned OFF. (The beep sounds before powering OFF.) - TOT (Time-Out Timer) function is activated. (Approximately 10 seconds before the Time-Out Timer cuts off transmission.) - the cloning read or write operation starts or finishes. - a received signal stops the scan. (Scan Stop Beep) - the communicating station finishes transmitting or the receive signal dis- appears while in the digital mode operation. (Standby Beep) Home CH Beep (Default: ON) Sounds > Home CH beep Turn the Home CH Beep ON or OFF. • OFF: No beep. • ON: When the specified Home CH is selected by rotating [DIAL], a beep sounds. NOTE: The Home CH frequency, memory or repeater can be respectively selected. (p. 17-5) 16-89