Icom ID-51A PLUS2 Advanced Owners Manual - Page 124
Entering the gateway repeater call sign, Viewing the repeater group
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Previous view 9 D-STAR OPERATION ■■Entering information into Repeater List DDNew repeater entry (Continued) 6. Entering the gateway repeater call sign The 8th digit in the call sign, entered in [5. Entering the repeater call sign] is automatically set to "G" as the gateway port. You can skip this setting and go to the next item. If you need to change it, follow the steps described below. @5 Push D-pad() to select "GW CALL SIGN," and then push D-pad(Ent) to enter the gateway repeater call sign edit mode. D-pad (Ent) () @6 Rotate [DIAL] to select the first character. • A to Z, 0 to 9, / and a space can be selected. • A space can be entered in any input mode. • Push [CLR] to delete the selected character, or hold down [CLR] to continuously delete the characters, first to the right, and then to the left of the cursor. @7 Push D-pad() to move the cursor to the second digit. @8 Repeat steps @6 and @7 to enter a name of up to 8 characters, including spaces. • The 8th digit in the gateway repeater call sign is set to only "G" or a space. @9 After entering the gateway repeater call sign, push D-pad(Ent). 7. Viewing the repeater group In this item, you can view the repeater group that is selected in [1. Selecting the repeater group]. You can skip this setting and go to the next item. If necessary, you can change the repeater group. #0 Push D-pad() to select "GROUP," and then push Dpad(Ent) to enter the repeater group selection mode. #1 Push D-pad() to select the desired repeater group (01 to 30), and then push D-pad(Ent). • The selected repeater group is displayed on the REPEATER LIST EDIT screen. Example: "JP1YYY G" is entered. ☞ Continued on the next page. 9-29