Icom ID-51A PLUS2 Advanced Owners Manual - Page 208
Entering a Memory channel
![]() |
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Previous view 12 MEMORY OPERATION ■■Entering a Memory channel qqPush [V/MHz] to select the VFO mode. wwSet a desired frequency and operating mode: ➥➥Rotate [DIAL] to set a desired frequency. (Example: 146.030) ➥➥Push [MODE] one or more times to select a desired operating mode. (Example: FM mode) ➥➥Set the duplex direction, frequency offset, tone squelch, and so on, if needed. eeHold down [S.MW] for 1 second to enter the Se- lect Memory write mode. • 1 short and 1 long beep sound. • The memory channel number blinks, and memory con- tents are displayed. rrRotate [DIAL] to select a desired channel to be pro- grammed. (Example: Channel 11) ttHold down [S.MW] for 1 second to program, and then return to the VFO mode. • 3 beeps sound. • Before returning to the VFO mode, the programmed memory contents are briefly displayed. • The Memory channel number automatically increases when continuing to hold down [S.MW] for 1 second after programming. NOTE: Push [CLR] to cancel the program and exit the Select Memory write mode before memory programming. Example: Programming 146.030 MHz/FM mode into memory channel 11 (a blank channel). Set 146.030MHz in the VFO mode. Hold down [S.MW] for 1 second to enter the Select Memory write mode. Rotate [DIAL] to select a channel 11. [DIAL] Hold down [S.MW] for 1 second to program. Returns to the VFO mode. 12-4
![](/manual_guide/products/icom-id51a-plus2-advanced-owners-manual-586a491/208.png)