Icom ID-51A PLUS2 Advanced Owners Manual - Page 106
Automatic Reply function
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Previous view 9 D-STAR OPERATION ■■Automatic Reply function When a call addressed to your own call sign is received, the Automatic Reply function automatically replies with your call sign. (Default: OFF) Depending on the setting, a recorded message or your position may be transmitted with the call sign. qqPush [MENU] . wwP ush D-pad() to select the root item ("DV Set"), and then push D-pad(Ent). D-pad (Ent) () eePush D-pad() to select "Auto Reply," and then push D-pad(Ent). rrPush D-pad() to select "ON," "Voice" or "Position." • ON: Replies with your own call sign. (No audio reply is sent) • Voice: Replies with your call sign and any Auto Reply message recorded on the microSD (up to 10 seconds). If no microSD card is inserted or no message is recorded, only your call sign is transmitted. The transmitted audio can be monitored. • Position: R eplies with your own call sign and transmits your position using the internal GPS receiver. (p. 9-13) When "OFF" or "Manual" is set in "GPS Select," the internal GPS receiver is temporarily turned ON. When "External GPS" is set in "GPS Select," the transceiver transmits your position. But if the external GPS receiver is not connected, the internal GPS receiver will be enabled. ttPush [MENU] to exit the MENU screen. NOTE: • When "ON" or "Voice" is selected, the Automatic Re- ply function is automatically turned OFF, when you push [PTT]. • When "Position" is selected, the Automatic Reply function is kept to ON, even if you push [PTT]. • The Power Save function is disabled when "ON" or "Voice" is selected. • The Power Save function is enabled when "Position" is selected. • The Automatic Reply function cannot be used on the SUB band. TIP: To record the voice signal You can record a voice announcement for the Auto Reply function in "DV Auto Reply" on the MENU screen. (p. 16-27) (MENU > Voice Memo > DV Auto Reply) Appears After receiving a call from "JG3LUK," the transceiver automatically sends a reply call. "TO" setting does not change, but "UR: JG3LUK (Caller's call sign)" is displayed. 9-11