Icom ID-51A PLUS2 Advanced Owners Manual - Page 69
D-star Introduction
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Previous view Section 7 D-STAR INTRODUCTION ■■D-STAR Introduction 7-2 ■■About the DR (D-STAR Repeater) function 7-2 ■■Ways to Communicate using the DR function 7-3 To begin the digital mode communication except in the DR function To begin the digital mode communication in other than the DR function, you can use the VFO mode, Memory mode and Call channel mode. This manual describes focuses on the DR function operation which can be set up easily, and if you want to use in other than the DR function, see the procedures as described to the right. For a Local area call or Gateway call: qqSet the access repeater's frequency. (p. 15-2) wwSet the frequency offset. (p. 15-4) eeSet the Duplex direction. (p. 15-5) rrSet the call signs. (p. 16-51) For a Simplex call: qqSet the operating frequency. wwSet the call sign. (p. 16-51) IMPORTANT! • The Repeater List, described in this manual, may differ from your transceiver's preloaded contents. • A lthough Japanese repeaters are used in the setting examples, the Japanese repeater node (port) letters are dif- ferent from other country's. Be sure to add a repeater node letter in the 8th digit of the call sign, according to the frequency band as shown below. 1200 MHz : A (B in Japan) 430 MHz : B (A in Japan) 144 MHz : C (no D-STAR repeaters in Japan) 7-1