Icom ID-51A PLUS2 Advanced Owners Manual - Page 194
Start to record when the [PTT] switch is pushed
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Previous view 11 VOICE MEMORY FUNCTION ■■Start to record when the [PTT] switch is pushed The transceiver starts to record the transmitted audio at the same time the [PTT] switch is pushed. After transmitting, the transceiver receives signal in a given amount of time, it also records the received audio. Therefore, you can record all communication audio to use this function. If you do not want to record all communication audio, turn this function OFF as described below. qqPush [MENU] to enter the Menu screen. wwP ush D-pad() to select the root item (Voice Memo), and then push D-pad(Ent) to go to the next level. D-pad (Ent) () (MENU > Voice Memo > QSO Recorder > Recorder Set > PTT Auto REC) eeRefer to the menu sequence shown directly above and push D-pad() to select, and then D-pad(Ent) to enter, one or more times until the last screen is displayed. rrPush D-pad() to select "OFF," then push D-pad(Ent) to save. • OFF: T he transceiver does not start to record when the [PTT] switch is pushed. • ON: The transceiver starts to record when the [PTT] switch is pushed. (Default setting) ttPush [MENU] to exit the Menu screen. NOTE: When you set PTT AUTO REC to ON, see the notes below. • The transceiver also starts to record audio when pushing the optional microphone's [PTT] switch, transmitting using with the VOX function or CI-V remote controller. • All transmit audio is recorded when "TX&RX" is set in the "REC Mode" item on the Menu screen. • When the transceiver receives a signal less than 10 seconds after transmitting, the transceiver also records the receive audio. • In addition, when the transceiver receives a signal less than 10 seconds after the signal is received, it also records the receive audio. 11-13