Icom ID-51A PLUS2 Advanced Owners Manual - Page 70
D-STAR Introduction, About the DR D-STAR Repeater function
![]() |
View all Icom ID-51A PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Previous view 7 D-STAR INTRODUCTION Before starting D-STAR, the following steps are needed. STEP 1 Entering your call sign (MY) into the transceiver. STEP 2 Registering your call sign (MY) to a gateway repeater. IMPORTANT! STEP 3 Entering your D-STAR equipment into your registration form. You have completed the steps!! See the Basic manual for details. ■■D-STAR Introduction • The D-STAR repeater enables you to call a HAM station near you, or around the world. • You can transmit and receive digital voice, including lowspeed data, at the same time. You can transmit and receive position data from the built-in GPS receiver. • You can make a transceiver to transceiver call (through no repeater) in the DR screen. ■■About the DR (D-STAR Repeater) function You can easily use the D-STAR repeaters with the DR (D-STAR Repeater) function. With this function, you can select the preprogrammed repeater or frequency in "FROM" (the access repeater or simplex), and UR call sign in "TO" (destination), as shown to the right. NOTE: If the repeater set in "FROM" (Access Repeater) has no Gateway call sign, you cannot make a gateway call. Destination (Repeater/Station) Access repeater or Simplex In the DR screen 7-2
![](/manual_guide/products/icom-id51a-plus2-advanced-owners-manual-586a491/70.png)